KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 1 KDC-MPV7019 KDC-MPV619 KDC-X459 KDC-4019 KDC-419 KDC-319 CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 2 English Contents Warning .......................................3 Safety precautions......................4 Notes on playing MP3 ................6 About CDs...................................8 General features .........................
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 3 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 4 English Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 5 Lens Fogging NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. If the unit still fails to operate properly after the Reset button has been pressed, contact your local KENWOOD dealer for assistance. • Press the reset button if the disc auto changer fails to operate correctly.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 6 English Notes on playing MP3 Entering ID3 tag This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, however, that the MP3 recording media and formats acceptable are limited. When writing MP3, pay attention to the following restrictions. The Displayable ID3 tag is ID3 version 1.x. For the character code, refer to the List of Codes. Acceptable media The MP3 recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 7 MP3 playing order When a Track Search is executed with file ¡$ being played ... When selected for play, Album Search, Track Search, or for Album Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 8 English About CDs Handling CDs CD cleaning • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. Removing CDs • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When removing CDs from this unit pull them out horizontally.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 9 General features SRC FM 38 ¢ u/d Release button Power Turning ON the Power Press the [SRC] button. OFF DAB MENU When the power is ON, the (page 22) is displayed as "CODE ON" or "CODE OFF". SCAN RDM REP M.RDM DISP NAME AUTO AUD NF LOUD 4 ATT / LOUD AM / Q / NF AUD DISP / NAME.S AME Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source KDC-MPV7019/MPV619/X459/419 Press the [SRC] button.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 10 English General features Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "Flat"/ "FLAT" User memory "User"/ "USER" Rock "Rock"/ "ROCK" Pops "Pops"/ "POPS" Easy "Easy"/ "EASY" Top 40 "Top40"/ "TOP40" Jazz "Jazz"/ "JAZZ" Volume Increasing Volume Press the [u] button. Decreasing Volume Press the [d] button. Attenuator Turning the volume down quickly.
KDC-MPV7019(K)_U.S r2 01.11.22 Adjustment Item Bass Center Frequency (KDC-X459 only) Bass level Bass Q Factor (KDC-X459 only) Bass Extend (KDC-X459 only) Middle Center Frequency (KDC-X459 only) Middle level Middle Q Factor (KDC-X459 only) Treble Center Frequency (KDC-X459 only) Treble level Balance Fader Volume offset 11:57 AM Page 11 Display "Bas F" Range 60/70/80/100 or 150 Hz "Bas"/"BAS" "BasQ" –8 — +8 1.00/1.25/1.50/2.00 "BasEX" ON/OFF "MidF" 1 Enter Standby Press the [SRC] button.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 12 English General features Folder name File name Song title & Artist name Album name & Artist name Track Time Clock Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Frequency Station name Clock Display In MP3 source Information Track number Disc name Station/Disc Naming (SNPS/DNPS) "SNPS" Attaching a title to a Station or CD.
KDC-MPV7019(K)_U.S r2 5 01.11.22 0:09 PM Page 13 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character "D" "A" "N" "C" "E" 6 7 Button [#3] [#2] [#6] [#2] [#3] 2 Enter Auxiliary input display setting mode Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [4] or [¢] button.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 14 English General features Tuner features ¢ SRC FM Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. OFF DAB MENU Removing the Faceplate 1 2 Press the Release button. Drop open the faceplate. SCAN RDM REP M.RDM DISP NAME AUTO AME AUD NF Drawing the faceplate to left side pull it to the front and remove it.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 15 Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. / "Auto1" Preset station "AUTO 2" Search in order of the stations seek / "Auto2" in the Preset memory. Manual "MANUAL" Normal manual tuning control. / "Manual" Tuning Selecting the station. 1 2 3 Select tuner source Press the [SRC] button.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 16 English Tuner features CD/MP3/External disc control features SRC FM 38 ¢ Auto Memory Entry Putting stations with good reception in the memory automatically. Release button OFF DAB MENU 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. SCAN RDM REP M.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 17 Playing CD & MP3 When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 3 Insert a disc. Press the faceplate on the right side, and return it to its former position. • When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 18 English CD/MP3/External disc control features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD2" CD player "DISC-CH" CD changer/ MD changer Pause and play Press the [38] button. Each time the button is pressed it pauses and plays. • Disc #10 is displayed as "0".
KDC-MPV7019(K)_U.S r2 2 01.11.22 11:57 AM Page 19 Do Album Search Press the [DISC+] or [DISC–] button. Random Play Play all the songs on the disc or MP3 folder in random order. Canceling Direct Album Search Press the [38] button. Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "RDM ON" is displayed. Input "0" to select disc 10. When the [¢] button is pressed, the next song select starts.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 20 English CD/MP3/External disc control features Album Select (Function of MP3) Quickly selecting the folder you want to listen to. 1 Text/Title Scroll Scrolling the displayed CD text, MP3 text, or MD title. Press the [DISP] button for at least 1 second. Enter Album Select mode Press the [#5] button. During Select mode the folder information is displayed as shown below.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 21 Menu system SRC FM MENU ¢ Menu System Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. OFF DAB MENU SCAN RDM REP M.RDM DISP NAME AUD AUTO AME 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 22 English Menu system Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. Press the Reset button and when it's removed from the battery power source 1 2 When the Security Code function is activated, the code can't be changed and the function can't be released.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 23 Function of the KDC-MPV7019/KDC-MPV619/KDC-X459/KDC-419 DSI (Disabled System Indicator) Switching Display Type A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting the Display type. Display "DisplayD" "DisplayA" "DisplayB" "DisplayC" Setting LED flashes. LED OFF.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 24 Function of the KDC-MPV7019/KDC-MPV619 Illumination Color Setting You can set the display to a desired color. 1 Select Illumination Color Setting Mode Press the [FM] or [AM] button. Select the "COL" display. 2 The color continues to change gradually Continue pressing the [4] or [¢] button. Release your finger at the color you want. The blue fine adjustment setting cannot be stored in memory.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 25 Function of the KDC-X459 System Q Text Scroll Setting the displayed text scroll. Setting display/don't display for the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control. Display "SYSQ ON" "SYSQ OFF" Display "SCL AUTO" "SCL MANU" The text scrolled is shown below.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 26 English Basic Operations of remote Loading and Replacing the battery Use one lithium battery (CR2025). Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. 4/¢ FM/AM/DISC+/DISC– 38 2WARNING Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. [#0] — [#9] Do not set the remote on hot places such as above the dashboard.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 27 In Tuner source In Disc source [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [4]/ [¢] buttons Doing track forward and backward. [4]/ [¢] buttons Tune up or down band. [#0] — [#9] buttons Press buttons [#1] — [#6] to recall preset stations. [DIRECT] button Enters and cancels the (page 15) mode. [DISC+]/ [DISC–] buttons Doing album forward and backward.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 28 English Accessories External view ......... Number of items External view ......... Number of items 1 3 .........1 .........4 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 2CAUTION 2 .........2 4 .........4 5 .........
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 29 Connecting Wires to Terminals 11 Rear right output (Red) REAR 10 Rear left output (White) 12 Non-fading right output (Red) (KDC-MPV7019/X459/4019 only) NON FADING 49 Non-fading left output (White) (KDC-MPV7019/X459/4019 only) To KENWOOD disc changer/ DAB control input/KPA-SD100/ KPA-HD100/KPA-SS100 25 13 Front right output (Red) FRONT 14 Front left output (White) To connect these leads, refer to the relevant instruction manuals.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 30 English Installation ■ Installation ■ Installing in Japanese-Made Cars Firewall or metal support Screw (M4X8) (commercially available) 1 Refer to the section "Removing the hard rubber frame" (page 31) and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N 8 mm MAX.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 31 ■ Removing the hard rubber frame ■ Removing the Unit 1 1 Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame. 2 3 Remove the screw (M4 × 8) on the back panel. Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Catch Insert the two removal tools deeply into the slots on each side, as shown.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 32 English Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? The Bass center frequency, Bass quality factor, Bass extend, Middle center frequency, Middle quality factor, and Treble center frequency can’t be adjusted.19 ✔ The (page 25) is set OFF. ☞ Set it ON.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 33 Tuner source ? ✔ The antenna control wire is not connected.40 ☞ Connect the wire correctly, referring to the section on . ? ? Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves.59 ✔ The setting is not canceled. ☞ The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 34 English Troubleshooting Guide ? Can’t enter Album Select mode.76 ✔ There’s no folder recorded in the MP3 media. ☞ Use a media with levels. ? The songs in the selected folder aren’t played in Album Select mode.77 ✔ There are no MP3 in the selected folder. ☞ Make sure there’s recorded content in the MP3 media. ? Noise or no sound generated when an MP3 is played.70 ✔ The track has the MP3 track name extension while it is not an MP3. ☞ Do not use the ".
KDC-MPV7019(K)_U.S r2 01.11.22 1:16 PM Page 35 The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. MECHA ER: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.E99 ➪ Check the disc magazine. And then press the reset button on the unit.
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 36 English Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1.6 µV/75 Ω) Frequency response (±3 dB) .................................30 Hz – 15 kHz Signal to Noise ratio (MONO) .........................................
