Owner's manual

44
K-521
Playing from a digital audio player
You can connect a Kenwood digital audio player (referred to hereafter simply as "digital audio player") to
the system and use it to play tracks.
D.AUDIO
Connect the digital audio player to the [D.AUDIO IN] termi-
nal on the rear panel of the main unit.
1
1
Use this procedure to connect a digital audio player to the system and play tracks.
Always turn this system and the digital audio player off before connecting the digital
z
audio player.
Also refer to the instruction manual that comes with the digital audio player you are
z
connection.
Connecting the digital audio player using the dedicated cable PNC-150 allows you to
z
operate the digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players (Europe and Australia only)
HDD audio player Memory audio player
HD20GA7
M1GC7, MGR-A7
Turn on the digital audio player.
2
2
Press the [D.AUDIO
E
] key to begin playback.
Simply pressing the
z
[D.AUDIO
E
] key turns on the system and begins play-
back.
If the digital audio player is not connected using the dedicated cable PNC-150,
z
use the controls on the connected digital audio player.
3
3
SPEAKERS
DIGITAL OUT
DIGITAL IN
D.AUDIO
IN
REC OUT
PLAY IN
SUB
WOOFER
PRE OUT
R
L
L
R
D.AUDIO
IN
If you use the dedicated cable for the connection, the volume and sound quality
z
settings on the digital audio player are disabled.
When you have fi nished using the digital audio player, disconnect the player’s
z
connection cable from the [D.AUDIO IN] terminal.
K-521E_B60-5813-08_01_GVT0294-002A.indb 44K-521E_B60-5813-08_01_GVT0294-002A.indb 44 09.10.26 4:31:58 PM09.10.26 4:31:58 PM