Operation Manual

8080 81
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Monitor Screen Setup
YoucanadjustimagequalityiniPodvideo,
picturefile,menuscreen,etc.
1 Touch the lower left area of any screen
for at least 1 second.
Screen Control screen appears.
2 Adjust each item as follows.
Bright/Tint/Color/Contrast/Black/
Sharpness
Adjustseachitem.
Dimmer
Selectdimmermode.
ON:Thedisplayandbuttonsdim.
OFF:Thedisplayandbuttonsdonotdim.
SYNC (Default):Turnsthedimmerfunctionon
oroffwhenthevehiclelight
controlswitchisturnedon
oroff.
NAV-SYNC:Turnsthedimmerfunctiononor
offaccordingtotheNavigation
Day/Nightdisplaysetting.
Mode (Playback screen only)
Selectscreenmode.
Full:Fullpicturemode
Just:Justifypicturemode
Zoom:Zoompicturemode
Normal:Normalpicturemode
NOTE
• Adjustingitemsaredifferentdependingonthe
currentsource.
• Youcanperformthisfunctiononlywhenyou
haveappliedtheparkingbrake.
• Theimagequalitycanbesetforeachsource.
Setting Up
View Camera Control
YoucansetupdisplaywhenaCMOS-300
Seriesviewcameraisused.
1 Press the <AUD> button for 1second.
Camera view screen appears.
2 Adjust each item as follows.
3
2
1
1 Guideline
Touchingeachtimeturnsonoroffthe
guidelinedisplayalternately.
2 Switching the View Camera
Touchingeachtimechangesbetweenthe
frontviewcameraandrearviewcamera.
3 Angle
Touchingeachtimechangescameraanglesin
thefollowingorder:
Superwideview/Wideview/Overheadview/
Wideview+Topview/Cornerview
NOTE
• Thevideocameracontrolsdescribedabove
maynotbeoperabledependingtheconnected
cameras.
System Setup
NOTE
• Eachoperationinthissectioncanbestartedfrom
themultifunctionmenu.
1 Touch [Menu] on any screen.
TOP Menu screen appears.
2 Touch [SETUP].
3 Touch [System].
System Menu screen appears.
See the following section for each setting.
• Set up the user interface (P.82)
• Adjust touch panel (P.84)
• Set up security (P.85)
• Set up memory (P.86)