What Do You Want To Do? DNX7330BT DNX7330BTM DNX5330BT DNX5330BTM DNX4330DAB DNX4330 GPS NAVIGATION SYSTEM INSTRUCTION MANUAL Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. Click the icon of the media you want to play.
Contents Before Use Remote control 108 Battery Installation___________________ 108 4 Radio and TV Operation 54 Functions of the Remote control Buttons_ 109 2 WARNING________________________ 4 Radio Basic Operation________________ 54 Troubleshooting How to Read this Manual 5 Digital Radio Basic Operation__________ 56 Problems and Solutions_______________ 112 Basic Operations 6 TV Basic Operation___________________ 58 Error Messages______________________ 113 Memory Operation________________
Return to the Top page Before Use Return to the Top page How To Read This Manual How to Read this Manual Before Use 2 WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your Kenwood dealer.
Return to the Top page Basic Operations Return to the Top page Basic Operations Basic Operations Number 1 Functions of the Buttons on the Front Panel Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.115). • If the Security Indicator (SI) function is turned on, this indicator flashes when the vehicle ignition is off (P.85).
Return to the Top page Basic Operations Return to the Top page Basic Operations DNX5330BT/DNX5330BTM 4 3 2 How to insert a microSD Card 1) Detach the part of the front panel. (P.8) 2) Hold the microSD card with the label side facing left and the notched section up, and insert it into the slot until it clicks. 3) Attach the part of the front panel. ● To eject the card: 1 5 6 7 Number 8 9 Name Disc insert slot A slot to insert a disc media. 2 0 (Eject) • Ejects the disc.
Return to the Top page Basic Operations Return to the Top page Basic Operations DNX4330DAB/DNX4330 4 3 2 Number 1 5 Name Disc insert slot A slot to insert a disc media. 2 0 (Eject) • Ejects the disc. 3 fi (Reset) 1 • Pressing for 1 second ejects the disc forcibly. 6 7 8 9 4 Remote Sensor Receives the remote control signal. 5 MENU • Displays the Top Menu screen (P.16). 6 NAV 7 Volume Knob • Turning adjusts volume up or down. • Pressing for 1 second turns the power off.
Return to the Top page Basic Operations Turning on the Unit The method of turning on is different depending on the model. 1 Press the
Return to the Top page Basic Operations 2 Return to the Top page Basic Operations Touch [Finish]. How to Play Media ●● To eject the disc: Press the <0> button. Music CD and disc media 1 Press the <0> button. USB device 1 Connect the USB device with the USB cable. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.80). 2 The panel opens. Insert the disc into the slot. The unit reads the device and playback starts.
Return to the Top page Basic Operations Return to the Top page Basic Operations ●● Customizing Top Menu screen Operating with the Top Menu Screen Drag the icon you want to register to the upper line. You can move up to three icons. Most functions can be performed from the Top Menu screen. 1 Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the
Return to the Top page Basic Operations Return to the Top page Basic Operations Flick scrolling Common Operations You can scroll the list screen by flicking the screen up/down or right/left. Introduces the common operations. General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.
Return to the Top page Basic Operations Navigation Operation Return to the Top page Basic Operations 2 Touch [ ] or [ ] in the navigation screen. For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the
Return to the Top page DVD, VCD Return to the Top page DVD, VCD DVD/Video CD (VCD) Operation DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode (P.109). • The screen shot below is for DVD. It may be different from the one for VCD.
Return to the Top page DVD, VCD Return to the Top page DVD, VCD Multi function menu DVD Highlight control DVD Disc Menu Operation VCD The functions of each key are as follows. You can set up some items in the DVD-VIDEO disc menu. 1 Touch illustrated area during playback. [4] [¢] Searches the previous/next content. [38] Plays or pauses. Highlight control lets you control the DVD menu by touching the menu key directly on the screen. 1 Touch [Highlight] in the Menu Control screen.
Return to the Top page DVD, VCD DVD play mode setting You can select DVD play mode. 1 Touch [Next] in the Menu Control screen. Return to the Top page DVD, VCD Zoom Control For DVD And VCD You can enlarge Playback screen for DVD and VCD. 1 For VCD, touch illustrated area during playback. * This function may not be performed depending on the disc. NOTE • You cannot touch the menu keys directly on the screen when zooming. Menu Control 2 screen appears.
Return to the Top page DVD, VCD DVD Setup You can set up the DVD playback functions. NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating with the Top Menu Screen (P.16). 1 Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. Source SETUP Menu screen appears. 4 5 Touch [DVD SETUP] in the list. DVD SETUP screen appears. Set each item as follows.
Return to the Top page DVD, VCD Return to the Top page DVD, VCD Disc setup Performs setup when using disc media. 1 Touch [SET] of [DISC SETUP]. DISC SETUP screen appears. 2 Select an option as follows. CD Read Sets the motion of this unit when a music CD is played. 1 (Default): Automatically recognizes and plays back an audio file disc, a DVD or a music CD. 2: Forcibly plays back a disc as a music CD.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device CD/Audio and Visual Files/iPod Operation 3 Multi function key Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.36). 4 Multi function menu Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.36).
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device USB device and iPod Picture/video screen 9 NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 1 2 2 6 7 3 4 5 3 4 8 1 Information display Displays the following information. • Current file name: Each time you touch this area, display switches between file number/folder number and file name. • 3, ¡, etc.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device Multi function menu Sub function menu Music CD Disc media iPod USB device The following functions can be performed by using keys in this area. [ ] (Disc media, iPod, USB device only) Searches track/file. For details on search operation, see Search Operation (P.38). [4] [¢] Searches the previous/next track/file. [3] [8] (iPod only) / [38] Plays or pauses.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device Other search Search Operation You can search music, video or picture files by the following operations. NOTE • If you use a remote control, you can jump directly to the desired track/file with entering the track/ folder/file number, play time, etc. For details, see Direct search mode (P.109). List search When you want to narrow the list down, there are other search ways.
Return to the Top page CD, Disc, iPod, USB device Folder search (USB device and disc media only) 1 Touch the desired folder. Return to the Top page CD, Disc, iPod, USB device Search from album artwork (USB device and iPod only) Picture search (USB device only) 1 Touch the desired picture. You can search music files by selecting the album artwork. 1 2 Contents of the folder are displayed in the right area of the screen. 2 4 Touch [ 3 ] on the selected artwork.
Return to the Top page CD, Disc, iPod, USB device Favorite list You can create an original playlist of your favorite 10 albums by selecting album artworks. 1 Return to the Top page CD, Disc, iPod, USB device 2 Touch the desired artwork in the favorite list. Movie Control You can adjust the movie playback from a disc media. 1 Touch and drag the desired album artwork in the lower line to the upper line. In the playback screen, touch illustrated area.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device Multi function menu PANDORA® Internet Radio Operation (region code 4 area only) You can listen to the PANDORA® internet radio on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. The following functions can be performed by using keys in this area.
Return to the Top page CD, Disc, iPod, USB device Device select You can display a Device select screen for device selection. 1 Return to the Top page CD, Disc, iPod, USB device Station list screen You can perform the following functions from this screen. Genre list screen You can perform the following functions from this screen. Touch [ ] in the control screen. The Device select screen appears. Selects the station Touch the station name in the list.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device Multi function menu Aha Operation You can listen to the Aha on this unit by controlling the application installed in the iPhone or Android. To enter Aha mode, touch [aha] icon in the Top Menu screen. The following functions can be performed by using keys in this area. [ • Install the latest version of the Aha application on your iPhone or Android. (P.
Return to the Top page CD, Disc, iPod, USB device Device select You can display a Device select screen for device selection. 1 Return to the Top page CD, Disc, iPod, USB device Station list screen You can perform the following functions from this screen. Sets the location information received from Aha at the destination of navigation. 1 Touch [ ] in the control screen. The Device select screen appears. Selects the station Touch the station name in the list.
Return to the Top page CD, Disc, iPod, USB device Return to the Top page CD, Disc, iPod, USB device USB setup USB/iPod/DivX Setup You can perform setup when using USB/ iPod/ DivX. 1 Set each item as follows. iPod setup 1 Set each item as follows. DivX VOD 1 Set each item as follows. NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating with the Top Menu Screen (P.16). 1 Touch [ ] in the control screen. Multi function menu appears.
Return to the Top page Radio, Digital Radio, TV Return to the Top page Radio, Digital Radio, TV Radio and TV Operation 7 Sub function menu The following functions can be performed by using keys in this area. • Switches the band: Touch [AM] or [FM]. • Tunes in a station: Touch [1] [¡]. The method of frequency switching can be changed. See Multi function menu (P.55). The bar in center (tuner only) shows the current frequency location.
Return to the Top page Radio, Digital Radio, TV Return to the Top page Radio, Digital Radio, TV Multi function menu Digital Radio Basic Operation (DNX4330DAB only) Most functions can be controlled from the source control screen. The functions of each key are as follows. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.109).
Return to the Top page Radio, Digital Radio, TV Return to the Top page Radio, Digital Radio, TV TV Basic Operation TV screen Most functions can be controlled from the source control screen and TV screen. 6 NOTE 6 • Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode (P.109). • You can only operate TV with the optional accessory TV tuner KTC-V500N/PV300/N/P connected.
Return to the Top page Radio, Digital Radio, TV Memory Operation Return to the Top page Radio, Digital Radio, TV 1 Auto memory Touch illustrated area during playback to switch the band you want to store in memory. You can store stations with good reception in memory automatically. This function is for tuner and TV only. 2 • The operation ends automatically if you do not operate within 10 seconds. 1 Touch [ ]. Sub function menu appears. 2 Touch desired band key.
Return to the Top page Radio, Digital Radio, TV Return to the Top page Radio, Digital Radio, TV List select You can select an ensemble from a list of memorized ensembles or select a service from a list of all services received. 1 Touch [ ] in the control screen. The multi function menu appears. 2 Touch [ ] in the multi function menu. The list type screen appears. 3 Touch desired list way.
Return to the Top page Radio, Digital Radio, TV Tuner Setup You can set tuner related parameters. This function is available for models with region code 2 or 3. 1 Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP] in the multi function menu. SETUP Menu screen appears. 3 Touch [Source]. Return to the Top page Radio, Digital Radio, TV Regional Sets whether to switch to the station only in the specific region using the “AF” control. Default is “ON”.
Return to the Top page Radio, Digital Radio, TV Announcement setup When the service for which ON is selected starts, switches from any source to Announcement to receive it. 1 Touch [SET] of [Announcement Select] in the Digital Radio SETUP screen. The Announcement Select screen appears. 2 Touch each Announcement list and set on or off. Return to the Top page Radio, Digital Radio, TV TV Setup 5 Set each item as follows. You can set the TV signal receiving areas.
Return to the Top page Bluetooth Operation Return to the Top page Bluetooth Operation Bluetooth Control Using the Bluetooth function, various functions can be used: listening to the audio file, making/receiving a call. NOTE • Bluetooth control is a function of the DNX7330BT/ DNX7330BTM/ DNX5330BT/ DNX5330BTM/ DNX4330DAB.
Return to the Top page Bluetooth Operation Return to the Top page Bluetooth Operation Playing Bluetooth Audio Device Using Hands-Free Unit 2 Select a dialing method. You can use telephone function by connecting the Bluetooth telephone to this unit. Bluetooth basic operation Simple Control screen List Control screen Making a call 1 5 4 1 Press the button. See the following table for each method. Call by entering a phone number 2 3 2 3 1 Touch [ ].
Return to the Top page Bluetooth Operation Return to the Top page Bluetooth Operation Receiving a call *1 You can sort the list to begin with touched character. 1 Touch [ ] to answer a phone call or [ ] to reject an incoming call. • Characters with no corresponding name will not appear. • During search, a non-accent character such as “u” is searched for instead of an accent character such as “ü”. *2 You can set the list to arrange in the order of last name or first name.
Return to the Top page Bluetooth Operation Return to the Top page Bluetooth Operation Reading SMS (Short Message Service) Message 1 2 Touch [ ] (received SMS message) or [ ] (sent SMS message) in the Hands Free screen. Received and sent SMS messages list appears on the screen. 5 Creating an SMS (Short Message Service) 1 Touch [ ], [ ], [ ], [ ], [ or [ ] in the Hands Free screen. The phone numbers list appears. 2 From the phone numbers list, select a phone number to send a SMS.
Return to the Top page Bluetooth Operation Return to the Top page Bluetooth Operation Voice Recognition Smartphone Link You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) You can receive Garmin’s traffic information and weather forecast by connecting your Android smartphone in which the Smartphone Link application is installed to this unit.
Return to the Top page Bluetooth Operation Hands-Free Setup Return to the Top page Bluetooth Operation 5 Set each item as follows. You can perform various setup about handsfree function. 1 2 Touch [Menu] on any screen. 3 Touch [Bluetooth]. Phone Information Use Sets whether to use phonebook, outgoing, incoming and missed calls list. ON (Default): Yes. OFF: No. SMS Use Select whether to use SMS. ON (Default): Uses SMS. OFF: Not uses SMS. Touch [SETUP]. SETUP Menu screen appears.
Return to the Top page Setting Up Return to the Top page Setting Up Setting Up Monitor Screen Setup You can adjust image quality in iPod video, picture file, menu screen, etc. 1 Touch the lower left area of any screen for at least 1 second. System Setup View Camera Control Mode (Playback screen only) Select screen mode. Full: Full picture mode You can set up display when a CMOS-300 Series view camera is used. NOTE 1 • Each operation in this section can be started from the multi function menu.
Return to the Top page Setting Up User interface You can setup user interface parameters. 1 Touch [User Interface] in the list. User Interface screen appears. 2 Set each item as follows. Return to the Top page Setting Up TEL Key Longer than 1 Second You can set the operation performed when the TEL key is pressed for 1 second. Select from “Voice”/”V.OFF”/”R-CAM”. Voice (Default): Displays the Voice Recognition screen. (P.82). V.OFF: Turn the display off.
Return to the Top page Setting Up Travel Prayer for Safe Drive Setting (DNX7330BTM/ DNX5330BTM only) When this function is set, the prayer for driving safety is displayed when the unit is turned on, then Quran is played. 1 Touch [SET] of [Travel Prayer for Safe Drive] in the User Interface screen. Travel Prayer for Safe Drive Setting screen appears. 2 Set each item as follows. Return to the Top page Setting Up Touch panel adjustment 1 2 Touch [Touch] in the System Menu screen.
Return to the Top page Setting Up Setup memory Return to the Top page Setting Up 3 Follow the instruction on the screen. Audio Control, AV-IN SETUP, Camera, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Touch [SETUP Memory] in the System Menu screen. SETUP Memory screen appears. 2 Follow the instruction on the screen.
Return to the Top page Setting Up Panel color coordinate You can set the screen and button illumination color. The selectable items differ depending on the unit. 1 2 Touch [Color] in the Display Menu screen. Color screen appears. Return to the Top page Setting Up Changing background image Registering original color You can register your original color. 1 Touch [Adjust] in the Panel Color Coordinate screen. Panel Color RGB Coordinate screen appears. 2 Use [2] and [3] to adjust each color value.
Return to the Top page Setting Up Navigation Setup You can set navigation parameters. 1 2 Touch [Menu] on any screen. 3 Touch [Navigation]. Touch [SETUP]. SETUP Menu screen appears. Return to the Top page Setting Up NAV Interrupt Speaker Selects speakers used for voice guidance of the navigation system. Front L: Uses the front left side speaker for voice guidance. Front R: Uses the front right side speaker for voice guidance. Front All (Default): Uses both front speakers for voice guidance.
Return to the Top page Setting Up Software Information Return to the Top page Setting Up AV Input Setup Check the software version of this unit. You can set AV input parameters. 1 2 Touch [Menu] on any screen. 1 2 Touch [Menu] on any screen. 3 Touch [Software]. 3 Touch [Source]. 4 Touch [AV-IN SETUP] in the list. AV-IN SETUP screen appears. 5 Set each item as follows. Touch [SETUP]. SETUP Menu screen appears. Software Information screen appears. 4 Confirm the software version.
Return to the Top page Audio Setting Up Return to the Top page Audio Setting Up Controlling Audio Speaker setup Setting Audio NOTE • Each operation in this section can be started from the multi function menu. 1 Touch [Audio SETUP]. 1 You can adjust the various settings such as audio balance or subwoofer level. 1 2 You can select a speaker type and its size to get the best sound effects. When the speaker type and size are set, the speaker crossover network is set automatically.
Return to the Top page Audio Setting Up Crossover network setup You can set a crossover frequency of speakers. 1 Touch the speaker to set the crossover in the Speaker Select screen. 2 Touch [X’over]. X’over screen appears. 3 Set each item as follows. Return to the Top page Audio Setting Up Car type setup When Speaker network is set to 3 way: Region code 3 area You can setup the car type and speaker network, etc. 1 Touch [Car Type] in the Audio SETUP screen. Car Type screen appears.
Return to the Top page Audio Setting Up DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Return to the Top page Audio Setting Up Controlling General Audio 1 Touch [Audio Control]. Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Subwoofer Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to “None”. See Speaker setup (P.95). Bass Boost Sets the amount of bass boost among “OFF”/ “Level1”/ “Level2”/ “Level3”.
Return to the Top page Audio Setting Up Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. If you use , you can also adjust equalizer manually. 1 Touch [Equalizer]. Return to the Top page Audio Setting Up NOTE • [iPod] is available only during iPod source. Operation Controlling equalizer manually This setting cannot be performed when you select [iPod] in the Equalizer screen. 1 2 Touch [EQ] in the Equalizer screen.
Return to the Top page Audio Setting Up Controlling equalizer manually 1 2 Touch [Tone] in the Equalizer screen. Set each item as follows. Return to the Top page Audio Setting Up Zone Control You can select different sources for both front and rear positions in the vehicle. 1 Touch [Zone Control]. [3] (Front Source, Rear Source) Select the audio source for each. Sound Effect You can set sound effects. [∞], [5] (Rear VOL.) Adjusts the rear channel volume. 1 Touch [Sound Effect].
Return to the Top page Audio Setting Up Return to the Top page Audio Setting Up Space Enhancer 1 Touch [Space Enhancer] in the Sound Effect screen. Highway sound setting Elevation Realizer and Supreme You can boost a certain range of sound that becomes hard to hear due to road noise. You can raise the sound position heard from the speakers virtually. You can restore the sound lost due to audio compression to a realistic sound. 1 1 1 Touch [Highway Sound] in the Sound Effect screen.
Return to the Top page Audio Setting Up Return to the Top page Audio Setting Up Position DTA control Listening Position You can adjust the sound effects according to your listening position. 1 Touch [Position]. You can fine-adjust your listening position. 1 2 In Position screen, touch [Adjust]. Select the speaker you wish to adjust by touching speaker icon. NOTE • Make fine adjustment of the delay time of the speaker output specified here to have a more suitable environment for your vehicle.
Return to the Top page Remote Controller Operation Return to the Top page Remote Controller Operation Remote control Functions of the Remote control Buttons This unit can be operated using the remote control. For DNX7330BT, DNX7330BTM, DNX5330BT, and DNX5330BTM, the remote control is supplied with the unit. For DNX4330DAB and DNX4330 the remote control is the optional accessory (KCA-RCDV331).
Return to the Top page Remote Controller Operation Return to the Top page Remote Controller Operation 4 9 1 2 3 5 Key Name VOICE 10 VIEW 6 11 MAP DIR 7 9 11 8 10 12 13 17 19 NAV 18 12 5/∞ AUD, DVD 23 24 13 2/3 TV AUD, DVD 25 14 Numeric Keypad 20 21 22 14 15 16 1 2 3 4 5 6 7 8 110 Key Name SRC Location of Function the mode switch AUD, TV Switches navigation display on/off. DVD Displays the DVD menu. Turns the playback control on or off while playing VCD.
Return to the Top page Troubleshooting Return to the Top page Troubleshooting Troubleshooting Other Problems and Solutions If any trouble occurs, first check the following table for possible problems. • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. About settings Problem • Cannot set up the subwoofer. • Cannot set up subwoofer phase.
Return to the Top page Troubleshooting Error Message Cause USB Device The connected USB device is rated Error!! a current capacity higher than the allowable limit. Authorization Error Connection to the iPod has failed. Update your iPod The iPod’s software is an older version which the unit can not support. Navigation Error. Please turn on power again later. Antenna Error The communication error has occurred due to severely cold temperature.
Return to the Top page Appendix Return to the Top page Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit.
Return to the Top page Appendix Connectable iPod/iPhone The following models can be connected to this unit. You can control an iPod/iPhone from this unit by connecting an iPod/iPhone (commercial product) with Dock connector using an optional accessory iPod connection cable (KCA-iP202 or KCA-iP102). The word “iPod” appearing in this manual indicates the iPod/ iPhone connected with the KCA-iP202 or KCA-iP102 (optional accessory).
Return to the Top page Appendix REP The repeat function is on. ■■USB FO-REP The folder repeat function is on. VIDEO Identifies the video file. MUSIC Identifies the music file. PICTURE Identifies the picture file. RDM The random function is on. REP The repeat function is on. PLST The play list mode is selected now. ■■iPod MUSIC Identifies the music file. VIDEO Identifies the video file. RDM The random function is on. A-RDM The album random function is on. REP The repeat function is on.
Return to the Top page Appendix Return to the Top page Appendix DVD Language Codes Code aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha he hi hr hu hy 122 Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faro
Return to the Top page Appendix ■■DSP section (DNX7330BT, DNX7330BTM) Graphics equalizer Band: 13 Band Frequency (BAND1 – 13) : 62.5/100/160/250/400/630/1k/1.6k/2.5k/4k/6.3k/ 10k/16k Hz Return to the Top page Appendix ■■FM tuner section Frequency Range (step) : 87.5 MHz – 108.0 MHz (50 kHz) Region code 4/6 model : 87.9 MHz – 107.9 MHz (200 kHz) Usable Sensitivity (S/N : 30 dB) : 7.2 dBf (0.63 μV/75 Ω) Gain : -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB Quieting Sensitivity (S/N : 50 dB) : 15.
Return to the Top page Appendix About this Unit ■■Copyrights • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • The “AAC” logo is a trademark of Dolby Laboratories.
Return to the Top page Appendix ■■The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
