User's Manual

KENWOOD CORPORATION
TK-2180-K, TK-2180-K2 FCC ID:ALH37323110 IC:282D-37323110
TK-3180-K, TK-3180-K3 FCC ID:ALH37333110
Installing the Antenna
Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and
turning it clockwise until secure.
Installing the Belt Clip
If necessary, attach the belt clip using the two supplied 3 x 6 mm screws.
Notes: If the belt clip is not installed, its mounting location may get hot during continuous transmission or when left sitting
in a hot environment.