Installation Guide

INSTALLATION AND SERVICE MUST BE PERFORMED BY
A QUALiFiED INSTALLER.
iMPORTANT: SAVE FOR LOCAL ELECTRICAL iNSPECTOR'S USE.
READ AND SAVE THESE iNSTRUCTiONS FOR FUTURE REFERENCE.
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
FOR YOUR SAFETY:
-- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
-- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
-- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Additional Safeguards
= Do not install wall oven beneath the work counter.
, The oven vent should not be located under 36"
from the floor.
Allow at least 19=3/8" clearance for
complete door opening.
3/8 "
"T
38 V16"__
37 318"
H
A
Electrical Outlet
Location for model
with lY2 oven
Jity
Drill a lY2" diameter hole
for gas hook up
Figure 1
A B C D E F G H
10" Min. 11/:,' Min. 24" Min. 20" 7-518" 22" 231/:'' 371/2" Min.
271/2'` Max. 38" Max.
NOTE: Wiring diagrams for these appliances are enclosed in this booklet.
Printed in United States
P/N 318201555 (0805) Rev. A
English - pages 1-7
Espahol- paginas 8-14
Wiring Diagram-pages 15-16