Refrigerator User Manual

REVERSEANDREATTACHREFRIGERATORDOOR

• Using a 1A-inch socket wrench, loosen and remove °

Hinge Pin from the Middle Hinge Pin Bracket.

Remove washer underneath the middle hinge and •

set aside

NOTE: At this point the door will be loose, lift up o

door slightly and remove it. (Fig. 20 and 20a).

Fig. 20a

Loosen and remove the 2 bolts and the

phillips head screw to remove the Middle

Hinge Bracket from refrigerator housing

(Fig. 21). Set parts aside.

REMOVE base grill.

See BASE GRILL INSTRUCTIONS on page 8.

Remove the washer from the Bottom Hinge

Pin (Fig. 22).

Using a 1A-inch socket wrench, loosen and remove

the Hinge Pin from the Bottom Hinge. Reattach

the Hinge Pin to the opposite side of the Hinge

(see Fig. 22 and 22a). NOTE: This is easier to do

while the Hinge is still attached.

Fig. 22

22a

Using 10mm or 13/32-inch socket wrench

with 2-inch extension, loosen the 3 bolts

and remove the Bottom Hinge from right

side of housing (Fig. 23).