Model No. 680.84973 0 € Save This Manuat For Future Reference CAUTION: Read rules for safe operation and instructions SoW by SEARS, ROEBUCK AND CO., Chica_o, carefu[ty IL 60179 U.S.
IMPORTANT SAFETY INSTRUCTIONS This Rug shampooer/ftoor When using etectrica[ Rug shampooer/ftoor Inctuding the fottowing READ ALL INSTRUCTIONS potisher is for househotd use onty. potisher, basic precautions should be followed. BEFORE USING THIS APPLIANCE To reduce risk of fire, electric shock, or injury • DO NOT USE FLAMABLE OR COMBUSTIBLE LIQUIDS, SUCH AS GASOLINE, OR USE IN AREAS WHERE THEY MAY BE PRESENT. • Do not reave this apptiance when ptugged in.
,SEARS Dear Homemaker: You have just invested in a fine Kenmore Rug Shampooer-,Ftoor Polisher. Before using your new Kenmore machine, please pause for a moment and carefully read this booklet, which contains instructions on how to operate and care for your machine. Specific instructions are given on rug shampooing, scrubbing, polishing, attachin8 and cleaning brushes, etc.
DO NOT PLUG IN ELECTRIC CORD UNTIL BRUSHES OR OTHER ACCESORIES HAVE BEEN ATTACHED AND SWITCH HAS BEEN PLACED IN THE "OFF" POSITION. HANDLE, SWITCH BOX AND CORD ASSEMBLY INSTRUCTIONS I. Place Lower handle tube (Fig. i) into handle tube socket "A" (Fig. 2). Fasten using bolt "B" and internally threaded nut "C" (Fig. 3) provided in the hardware package. If the handle tube is difficult to assemble (tight), insert blade of screwdriver into sl.ot (Fig.
DISPENSING SYSTEM MUST BE THOROUGHLY CLEANED IMMEDIATELY AFTER EACH USE. DO NOT STORE LIQUID IN DISPENSER. Remove dispenser from unit and empty. Rinse thoroughly with warm water. The dispensing system must be flushed immediately after use. Partially fit[ dispenser with warm water, mount on unit an then dispense at[ the water into a receptacle placed under the unit, A-_.. D-... D FIG. 11 FIG. 10 1, Raise dispenser top "A" dispenser "F" in base "B".
(VINYL, LINOLEUM, ASPHALT TILE AND NO WAX FLOOR) OPERATION INSTRUCTIONS I. SCRUBBING (FLOOR SRIPPING AND CLEANING) DISCONNECT CORD FROM ELECTRICAL OUTLET DO NOT USE MACHINE TO SCRUB WOOD FLOORS. Attach scrubbing brushes (for scrubbing floors with an irregular surface) or nylon scrubbing pads (for scrubbing floors with a smooth surface). Remove dispenser tank and fill with, a stripper and cleaner, diluted as indicated on container. It is recommended to put the water in first to avoid foaming.
V. PERIODIC MAINTENANCE AVOID SOAKING. Mildewing or discolorations may occur. Sweep, dust or vacuum floor Buff floors as needed, following above. regularly. the directions To remove scuff marks on heavy traffic areas, follow the polishing directions above. Polishing and buffing floors often wltl prolong the time between waxing. Continue to shampoo until the foam disappears, then proceed to another area. Do not apply pressure. Light contact with the rug is sufficient for thorough cleaning.
MODEL 680 84973 1 13 • EXTERNAL/€_CHINE PARTS 33 35 12 10 11 9 8 6 _I 6A 37C 16B 41 26 U 42 4 45
MODEL 680 84973 . KEY PART NO. PART NAME I 2 3 130947 052696 052710 Upper Handle Tube Lower Handle Tube 4 010536 5 130950 SeLfTapping Screw 6-20 x 3/4 (2 req,) Switch box 6 010154 7 8 9 100042 110083 130951 10 171724 11 130952 010273 17. 13 240091 14 131062 15 051721 16 Handle Self Tapping Screw 6-20 x 5/16 Wire Nut Switch 3 speed Switch Box Cover EXTERNAL/VLACHINE PARTS KEY 47 PART NO. 53471 PART NAME 48 130141 FeLt Buffing Pad (2 req.
MODEL 680 84973 EXTERNAL/v_ACHINE PARTS 7A O_ 64__ __.L. _70 62B 75 71 72 73 74 63 _------- 6\ 84 _77 86 85 87 96E 96E 96C 96B 76 80
MODEL. 680 84973 • INTERNAL MACHINE PARTS KEY 60 PART NO. PART NAME 131418 Motor Cover KEY 98 61 011483 280324 460104 Self Tapping Screw Brush Holder Assy Brush 99 63 460590 280263 Holder Assy Armature 64 011489 Self Tapping Screw &18 x 1/2 (4 req.) 65 67 67 A 054244 280267 081832 Field Support (2 req.) Field 3 Speed Field Sleeve 68 0t 1490 Self Tapping Screw 8 x 5/16 (2 req.) 69 70 050607 Bearing CLamp (2 req,) 120133 Bearing Armature Seal (2 req.
m c -s ] I The ServiceSideof Sears.'_ Model No. 680.
