OPERATOR'S MANUAL -i ® INFO - LINE: After reading this manual, if you have any questions or comments on your Kenmore Air Cleaner, call 1-888-277-2810 0M-85264 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
IMPORTANT SAFETY INSTRUCTIONS Please read all instructions before using this product. Save these instructions for easy reference. When using electrical appliances, basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following. o Read all instructions before operating the air cleaner. o Place the air cleaner where it is not easily knocked over by persons in the household. o ALWAYS unplug air cleaner when not in use.
[_1 DO NOT use this product with any solid-state speed ARNING! Toreducetheriskoffireorelectricshock, control device. ONEoyEAR FULL WARRANTY ON KENiViORE AIR CLEANER For one year from the date of purchase, when operated and maintained according to the owner's manual, if any part of this air cleaner fails due to a defect in material or workmanship, RETURN ITTO ANY SEARS STORE OR OTHER KENiVIORE OUTLET mNTHE UNITED STATES FOR FREE REPLACEMENT.
SETUP Your Electrostatic Air Cleaner was thoroughly inspected and tested at the factory prior to packaging. Visually inspect it upon removal from the box. Remove and discard any packing material. Return the unit if it shows any signs of damage or mishandling. Contents: o Electrostatic Air Cleaner o 2 Protective Screens (Only used when cleaning the Collecting Cell in a dishwasher...see pg. 12) Place air cleaner near a power outlet, and avoid using an extension cord.
HOW IT WORKS Dirty air is drawn through the front grill and passes through a 3-stage cleaning system (See Fig. 1). Stage 1 The washable Pre-filter prevents larger particles from passing through into the Collecting Cell. Stage 2 The Collecting Cell has a 2-part function. First, the dirt particles not trapped by the Pre-filter are electrically charged by fine ionizing wires. Second, the charged particles are then attracted to and collected by the Collector Plates.
OPERATION Fig. 2 H. LCD Display G. Hourmeters [iliil I i gill Clean Cell NOW I A. Check F. Ionizer button Pre=filter B. Check Cell D. Power ON/OFF button When unit is on, all control buttons are lit E. Timer button Allows you to set time of operation desired C. Speed button Set desired speed POWER ON/OFF TO START AIR CLEANER (See Fig. 2 D ) Press the Power Button. The LCD screen and the buttons will light up. The air cleaner starts in Low Speed with the Ionizer On and the Timer Off.
OPERATION cont. Each time you start your Air Cleaner, we recommend that you run it at Turbo speed for a few minutes for fast initial cleaning. The Ionizer, when turned ON, adds negative ions to the exiting stream of clean air. This function provides additional air freshening and revitalization. Then set it to HI, MED, or LO as desired. TO TURN IONIZER ON/OFF (See Fig. 2 F) Press the Ionizer Button to turn Ionizer ON. The ION icon on control board will light up. To turn Ionizer OFF, push button again.
MAINTENANCE CLEANING SCHEDULE Your air cleaner also has built=in cleaning reminders to let you know when the Pre-Filter and Collecting Cell should be cleaned. The Pre-Filter and Collecting Cell require periodic cleaning in order for the air cleaner to operate at peak efficiency. The frequency of cleaning will depend on the environment in which the air cleaner is used. Icons on the LCD and flashing lights will alert the user to the need for cleaning the Pre-Filter and the Cell.
MAINTENANCE CLEANING THE PRE-FILTER When the Check Pre-Filter time to clean the pre-filter. light is flashing (See fig. 2 A), it is 1. Turn off the air cleaner by pressing the Power Switch. Then unplug the unit from the electrical outlet. [_ DO NOT touch unit for 2 minutes after turning OFF and unplugging. AUTION: To avoid harmless static shock that may occur, 2. Firmly grasp the notches on both sides of the front grill and pull the grill outward and remove. 3.
MAINTENANCE 7. Plug the air cleaner back into a properly grounded 3-prong outlet. 8. Press the power On button. 9. Press the Check Preofilter button to reset it. CLEANING THE CELL (See Fig. 3) When the Check Cell light is flashing, it is time to clean the cell. 1. Turn Off the air cleaner by pressing the Power Button. Then unplug the unit from the electrical outlet. DO NOT touch unit for two minutes after turning OFF and -i unplugging. AUTION: To avoid harmless static shock that may occur, 2.
MAINTENANCE Washing Cell in a Tub of Hot Water; Recommended Method (See Fig. 3) 1. Fill a tub large enough to hold the entire cell with hot water (140 ° to 160°F.) and add detergent. Use a mild dishwashing liquid that is non-chlorine and non-abrasive. Agitate the solution for proper mixture. NOTE: Wear gloves to protect your hands. 2. Hold the bale handles on the cell and let it soak for about 10 minutes and then remove cell. 3.
MAINTENANCE Washing Cell in a Dishwasher (See Figures 4 and 5) NOTE: The dishwasher cavity must be large enough to accommodate the cell without any interference with moving parts in the dishwasher. CAUTION: DO NOT use dishwashing detergent when cleaning cell in automatic dishwasher. Dishwasher detergent is abrasive and may damage cell. Operate dishwasher with hot water only. 1. The 2 protective screens (Fig. 5) provided MUST BE attached to the cell BEFORE placing the cell in the dishwasher (Fig.
MAINTENANCE Extra Cleaning of Cell Occasionally, a few particles of dirt may pass through the pre-filter and enter the cell. The cell will begin making snapping sounds. If the snapping sounds continue, turn off the unit and wash the cell as described in the previous two sections. GENERAL CLEANING To Clean the Outside of the Air Cleaner Cabinet 1. Turn Off the air cleaner by pressing the Power Switch. Then unplug the unit from the electrical outlet. 2.
MAINTENANCE TROUBLESHOOTING PROBLEM Unit will not start when On Button is pushed. SOLUTION 1. Check to be sure that the power cord is plugged into a properly-grounded 3-prong 120-v., AC outlet. 2. Check the electrical outlet by plugging in a working appliance or test light. 3. Unplug the unit. Remove and reassemble the front grill to make sure it is properly fitted. If the grill was not fitted properly the unit will not start. TECHNICAL SPECiFiCATIONS Width 20- 7/8 in.(53cm) Height 27-7/8 in.(70.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matterwho sold it.v For the replacement parts, accessories and i ii i !!ii ii ! owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1o800o4 °YIY°HOi_E® Anytime, day or night (U.S.A.
