Manual

Thissectiondescribestheavailablewashcyclesandwillhelp
youmakethebestcycleselectionsforyourwashloads.Each
cycleisdesignedfordifferenttypesoffabricandsoillevels.
• Thewasherpausesbrieflythroughouteachcycle.These
pausesarenormal.Referto"NormalSounds"forsoundsyou
mayhearduringawashcycle.
• Referto"UnderstandingWasherCycles"tolearnwhat
happensduringawashcycle.
SPIN
HEAVY DUTY
R/NSE
10 REGULAR
GENTLE
6 SHORT
PERMANENT
PRESS
RINSE
SHORT 8
REGULAR 10-
SUPER 12-
SPIN
OFF
_8
SOAK--
KNIT/DELICATE
RINSE
Heavy Duty
Use this cycle for sturdy or heavily soiled loads. Wash combines
fast-speed agitation and fast-spin speeds.
• Use the Super or Regular settings for heavily soiled and
sturdy fabrics.
• Use the Short setting for light soil and sturdy fabrics.
Permanent Press
The Permanent Press cycle includes a load-cooling process that
reduces wrinkling. Wash combines fast and slow-speed agitation
and slow spin speeds.
When the timer reaches Pause, the washer will drain and pause
for approximately 2 minutes while some of the wash water is
drained and replaced with rinse water.
Knit/Delicate
Use this cycle for lingerie and loosely knit items. Part way
through the cycle, the washer pauses and soaks the load for
gentler care of lightly soiled delicate items. Wash combines
slow-speed agitation for gentle soil removal and slow spin
speeds to reduce wrinkling.
Soak
The Soak cycle features 4 minutes of agitation followed by an
unlimited soak time to help remove heavy soils and stains that
need pretreatment. You will need to reset the washer to a Spin
setting to remove water.
• The Soak cycle should be followed by the Heavy Duty or
Permanent Press or Prewash cycle with additional detergent.
NOTE: Hot water is not recommended for soaking. It may set
some stains.
Prewash
Use this cycle to get up to 4 minutes of agitation to help remove
heavy soils and stains that need pretreatment.
• The Prewash cycle should be followed by the Heavy Duty or
Permanent Press cycle with additional detergent.
When using extra detergent for heavily soiled clothes, or washing
special-care items, you may find an extra rinse and spin is
needed.
1. Push in the CYCLE CONTROL knob and turn it clockwise to
any of the Rinse settings.
• For fast agitation and spin, use the Heavy Duty cycle.
• For slow agitation and spin, use the Permanent Press
cycle.
2. Set WATER LEVEL and WATER TEMP controls to the desired
setting.
3. Pull out CYCLE CONTROL knob. The washer fills to the
selected load size, agitates, drains, and spins.
8 HS_e!S _r_
A drain and spin may help shorten drying times for some heavy
fabrics or special-care items by removing excess water.
1. Push in CYCLE CONTROL knob and turn it clockwise to any
of the SPIN settings.
• For a fast spin, use Heavy Duty cycle.
• For a slow spin, use Permanent Press cycle.
2. Pull out CYCLE CONTROL knob. The washer drains, then
spins.
21