Datasheet

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2073_T59X • 3/6/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
3
KEMET Organic Capacitor (KO-CAP
®
) – Automotive Grade
T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
Environmental Compliance
RoHScompliant(6/6)accordingtoDirective2002/95/ECwhenorderedwith100%Snsolder.Halogen-free.
Qualication
Test Condition Characteristics
Endurance
105°Catratedvoltage,2,000hours
125°Cat2/3ratedvoltage,2,000hours
*2
150°Cat2/3ratedvoltage,1,000hours(T599,V
R
> 16 V)
150°Cat2/3ratedvotage,2,000hours(T599,V
R
< 16 V)
ΔC/C Within−20%/+10%ofinitialvalue
DF Within2xinitiallimit
DCL Within2xinitiallimit
ESR Within2xinitiallimit
StorageLife
105°C at 0 volts, 2,000 hours
125°C at 0 volts, 1,000 hours
*2
150°C at 0 volts, 1,000 hours (T599)
ΔC/C Within−20%/+10%ofinitialvalue
DF Within2xinitiallimit
DCL Within2xinitiallimit
ESR Within2xinitiallimit
Humidity
85°C,85%RH,load,500hours(T591)
85°C,85%RH,load,1,000hours
(T597, T598, T599)
ΔC/C
Within−5%/+35%ofinitialvalue
DF
Within1.5xinitiallimits
DCL Withininitiallimit
ESR Within2xinitiallimit
Moisture
Resistance
*1
MIL–STD–202,Method106,
65°C,90–100%RH,noload,10cycles
ΔC/C Within−10%/+20%ofinitialvalue
DF Withininitiallimit
DCL
Withininitiallimit
ESR Within2xinitiallimit
Temperature
Cycling
JESD22, Test Method A104,
−55°Cto+105°C/+125°C/+150°C
*2
,1,000cycles
ΔC/C
Within−20%/+10%ofinitialvalue
DF Withininitiallimits
DCL Withininitiallimit
ESR
Within2xinitiallimits
SurgeVoltage
105°C,1.32xratedvoltage,1,000cycles,
33Ωinseries
125°C/150°C, 1.32 x (0.67 x V
R
),1,000cycles,
33Ωinseries
*2
ΔC/C Within−20%/+10%ofinitialvalue
DF Withininitiallimits
DCL Withininitiallimits
ESR Withininitiallimits
Temperature
Stability
Extreme temperature exposure at a succession
ofcontinuousstepsat
+25°C,−55°C,+25°C,+85°C,
+105°C/+125°C/+150°C
*2
,+25°C
+25°C −55°C +85°C +105°C/+125°C/+150°C
*2
ΔC/C IL
*3
±20% ±20% ±30%
*4
DF IL IL 1.2 x IL 1.5 x IL
DCL IL N/A 10 x IL 10 x IL
Mechanical
Shock/
Vibration
AEC–Q200(MIL–STD–202,Method213,Figure1,
Condition F.)
ΔC/C
Within±10%ofinitialvalue
DF
Withininitiallimits
AEC–Q200(MIL–STD–202,Method204,5Gfor20
minutes/12cycleseachof3orientations.
Testfrom10–2,000Hz.)
ESR Withininitiallimits
DCL Withininitiallimits
*1
T598 only
*2
Refer to part number specications for individual temperature classication
*3
IL = Initial limit
*4
For T599 (≤ 16 V) apply −30%/+40%