Datasheet

24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3121_R75H • 6/16/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75H, Single Metallized Polypropylene Film, Radial, DC, and Pulse Applications (Automotive Grade)
Mounting
Resistance to Vibration and Mechanical Shock
AEC-Q200 Mechanical Stress Tests:
Mechanical Shock
MIL-SDT-202 Method 213
Test condition C
Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details)
Vibration
MIL-SDT-202 Method 204
5 g for 20 minutes, 12 cycles each of 3 orientations
Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure
points at corners of opposite sides. Parts mounted within 2" from any
securepoint.Testfrom10–2,000Hz.
The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board.
Thecapacitorswithpitch≤22.5mmcanbemechanicallyxedbytheleads,forpitch>22.5mm,thecapacitorbodyhasto
beproperlyxed(e.g.clampedorglued).
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Margin
Molded Plastic
Case
Margin
Single-Sided Metallized
Polyester Film
(Second Layer)
Polypropylene Film
(First Layer)
Polypropylene Film
(Third Layer)
Singe-Sided Metallized
Polyester Film
(Fourth Layer)
1 Section
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Schemes