Datasheet

R75 2 - R75 L
MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L (Digit 12: 0 to 9)
ELECTRICAL CHARACTERISTICS
Rated voltage (V
R
): 230Vac (400Vdc) - 250Vac (560Vdc)
Rated temperature (T
R
):+85°C
Temperature derated voltage:
The following decreasing factor has to be applied on
the rated voltage:
+85°C to +105°C: 2.00% per °C for V
R
(d.c.)
+85°C to +105°C: 0.5% per °C for V
R
(a.c.)
Capacitance range: 0.056 µF to 10 µF.
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Total self-inductance (L): (Lead length ~2 mm)
Pitch (mm) 15 22.5 27.5 37.5
L (nH) ≈
10 18 18 20
Dissipation factor (DF):
tgδx10
-4
at +25°C±5°C
kHz C≤0.1µF 0.1<C≤1.0µF 1<C≤3.3µF 3.3<C≤10µF
1
10
100
≤04
≤06
≤25
≤5
≤8
≤6 ≤10
Insulation resistance:
Test conditions
Temperature: +25±C°5°C
Voltage charge time: 1min
Voltage charge:
100Vdc
Performance
≥1x10
5
MΩ for C≤0.33µF (5x10
5
MΩ)*
≥30000 s for C >0.33µF (150000 s)*
* Typical value.
Test voltage between terminations:
1.6xV
R
applied for 2 s at +25°C±5°C
Surge test:
1500 Vpk (10 pulses) for 230Vac
1700 Vpk (10 pulses) for 250Vac
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10
-4
at 1kHz
Insulation resistance: ≥50% of initial limit.
Test conditions 2nd
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Voltage applied: V
R
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ):
≤10x10
-4
at 1kHz
Insulation resistance: ≥50% of initial limit.
Test conditions 3rd
Temperature: +85°C±2°C
Relative humidity (RH): 85% ±2%
Test duration: 250 h
Voltage applied: V
R
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤10x10
-4
at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied:
1.25xV
R
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ):
≤10x10
-4
at 10kHz for C≤1µF
≤10x10
-4
at 01kHz for C>1µF
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ):
≤10x10
-4
at 10kHz for C≤1µF
≤10x10
-4
at 01kHz for C>1µF
Insulation resistance:
≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12
of DC lm capacitors catalogue)
Performance
Capacitance change |∆C/C|:
≤0.5%
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation,
ou=Marketing Communications, cn=Marcy Brand,
email=[e-mail]
Date: 2012.07.10 15:13:25 -04'00'