Datasheet

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3103_R60 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors
R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade)
Dimensions – Millimeters
H
p
LL
d
L
B
FRONT VIEW
SIDE VIEW
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0 ±0.4 4.0 +0.2 9.0 +0.1 13.0 +0.2 0.6 ±0.05
10.0 ±0.4 5.0 +0.2 11.0 +0.1 13.0 +0.2 0.6 ±0.05
10.0 ±0.4 6.0 +0.2 12.0 +0.1 13.0 +0.2 0.6 ±0.05
15.0
±0.4
5.0
+0.2
11.0
+0.1
18.0
+0.3
0.8
±0.05
15.0 ±0.4 6.0 +0.2 12.0 +0.1 18.0 +0.3 0.8 ±0.05
15.0 ±0.4 7.5 +0.2 13.5 +0.1 18.0 +0.5 0.8 ±0.05
15.0 ±0.4 8.5 +0.2 14.5 +0.1 18.0 +0.5 0.8 ±0.05
15.0 ±0.4 9.0 +0.2 12.5 +0.1 18.0 +0.5 0.8 ±0.05
15.0 ±0.4 10.0 +0.2 16.0 +0.1 18.0 +0.5 0.8 ±0.05
15.0 ±0.4 11.0 +0.2 19.0 +0.1 18.0 +0.5 0.8 ±0.05
15.0 ±0.4 13.0 +0.2 12.0 +0.1 18.0 +0.5 0.8 ±0.05
22.5 ±0.4 6.0 +0.2 15.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5 ±0.4 7.0 +0.2 16.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5 ±0.4 8.5 +0.2 17.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5 ±0.4 10.0 +0.2 18.5 +0.1 26.5 +0.3 0.8 ±0.05
22.5 ±0.4 11.0 +0.2 20.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5 ±0.4 13.0 +0.2 22.0 +0.1 26.5 +0.3 0.8 ±0.05
27.5 ±0.4 9.0 +0.2 17.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 11.0 +0.2 20.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 13.0 +0.2 12.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 13.0 +0.2 22.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 14.0 +0.2 28.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 18.0 +0.2 33.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 22.0 +0.2 37.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5 ±0.4 24.0 +0.2 15.0 +0.1 32.0 +0.3 0.8 ±0.05
37.5 ±0.4 11.0 +0.3 22.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 13.0 +0.3 24.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 16.0 +0.3 28.5 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 19.0 +0.3 32.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 20.0 +0.3 40.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 24.0 +0.3 15.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 24.0 +0.3 19.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 24.0 +0.3 44.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5 ±0.4 30.0 +0.3 45.0 +0.1 41.5 +0.3 1.0 ±0.05
Note: See Ordering Options Table for lead length (LL/H
0
) options.