Datasheet

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Performance Characteristics cont'd
Impedance Graph
100
Z[Ω]
0.1 1 10 100
F [MHz]
10
1
0.1
0.01
0.001
4.7 μF p.37.5
1 μF p.27.5
0.33 μF p.22.5
0.1 μF p.15
0.01 μF p.10
Dissipation Factor
(tanδ)
≤0.1%(0.06%*)at1kHz,+25°C±5°C(*typicalvalue)
Test Voltage Between
Terminals
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the
requirementsinapplicableequipmentstandards.Allelectricalcharacteristicsarecheckedafterthetest.Thistest
cannotberepeated,asthereisariskofdamagingthecapacitor.KEMETisnotliableinsuchcasesforanyfailures.
Insulation Resistance
Measuredat+25°C±5°C,accordingtoIEC60384–2
Minimum Values Between Terminals
Voltage Charge Voltage Charge Time C≤0.33μF C>0.33μF
100 VDC 1 minute
≥1•10
5
MΩ
(≥5•10
5
MΩ)*
≥30,000MΩ•µF
(≥150,000MΩ•µF)*
In DC Applications Recommendedvoltage≤560VDC