Datasheet

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 1/14/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – AC Line EMI Suppression and RC Networks

PME271M, Metallized Impregnated Paper, Class X2, 275 VAC

Performance Characteristics

Rated Voltage 275 VAC 50/60 Hz

Capacitance Range 0.001 – 0.6 µF

Capacitance Tolerance ±20%, ±10%, ±5% on request

Temperature Range −40°C to +110°C

Climatic Category 40/110/56

Approvals ENEC, UL, cUL

Dissipation Factor

Maximum Values at +23°C

1 kHz 1.3%

Test Voltage Between Terminals

The 100% screening factory test is carried out at 2,150 VDC. The

voltage level is selected to meet the requirements in applicable

equipment standards. All electrical characteristics are checked

after the test. It is not permitted to repeat this test as there is a

risk to damage the capacitor. KEMET is not liable in such case

for any failures.

Insulation Resistance

Minimum Values Between Terminals

C≤0.33µF ≥12,000MΩ

C > 0.33 µF ≥4,000MΩ•µF

In DC Applications Recommendedvoltage≤630VDC

Environmental Test Data

Test IEC Publication Procedure

Endurance EN/IEC 60384–14

1.25 x V

VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1

second, 1,000 hours at upper rated temperature

Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s

Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s

Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles

Active Flammability IEC 60384–14 V

+20surgepulsesat2.5kV(pulseevery5seconds)

Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest

Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days