Datasheet

2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com A4045_PEG130 • 7/19/2014
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC
Performance Characteristics
Item Performance Characteristics
Capacitance Range 900 – 6,300 µF
Rated Voltage 25 – 63 VDC
Operating Temperature -40 to +105°C
Capacitance Tolerance -10/+30% at 100 Hz / +20°C
Operational Lifetime 37,000 hours at +105°C (hours, D = 20 mm)
Shelf Life 5,000 hours at +105°C or 10 years at +40°C 0 VDC
Leakage Current
I = 0.003 CV + 4.0 (µA)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Vibration Test Specications
Procedure Requirements
0.75 mm displacement amplitude or 10 g maximum
acceleration. Vibration applied for three 2-hour sessions
at 10 – 2,000 Hz (capacitor clamped by body).
No leakage of electrolyte or other visible damage.
Deviations in capacitance and tan δ from initial
measurements must not exceed: Δ C/C < 5%.
Standards IEC 60384–4 long life grade 40/125/56
Compensation Factor of Ripple Current (RC) vs. Frequency
Frequency 100 Hz 300 Hz 1 kHz 5 kHz 100 kHz
Coefcient 0.35 0.57 0.80 1.00 1.04
Test Method & Performance
Endurance Life Test
Conditions Performance
Temperature +105°C
Test Duration 12,000 hours
Ripple Current Maximum ripple current specied in table
Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
Performance The following specications will be satised when the capacitor is tested at +20°C:
Capacitance Change Within 15% of the initial value
Equivalent Series Resistance Does not exceed 200% of the initial value
Leakage Current Does not exceed leakage current limit