Datasheet

ManualsBrandsKEMET ManualsCapacitorsCapacitor, 68nF, 40VAC, 63VDC, 10%

RoHS

Compliant

Resonance frequencies

MMK 5

Resonance frequencies

MMK7.5 ... 37.5

Z (Ω)

0.1 1.0 10

0.001

0.01

0.1

1.0

100 MHz

1.0

0.1

0.01

Z (Ω)

0.1 1.0 10

0.001

0.01

0.1

100 MHz

1.0

0.1

0.01

50 63 100 250 400 630 1000

30 40 63 160 200 220 250

0.001 0.001 0.001 0.001 0.001 0.001 0.001

–10.0 –82 –82 –39 –18 –6.8 –4.7

±20%, ±10% standard, ±5%.

–55 ... +100°C

Above +85°C DC and AC voltage derating is 1.25%/°C.

+85°C

IEC 60068-1, 55/100/56

DIN 40040, FME

–55 ... +100°C (+125°C)

Average relative humidity ≤ 75 %

RH = 95% for 30 days per year.

RH = 85% for further days limited by average value per

year, occasional slight condensation permitted.

1.6 x U

VDC for 2s

Max. 2% after a 2 year storage period at a temperature

of +10 ... +40°C and a relative humidity of 40...60%.

Operational life > 200 000 h.

Failure rate < 3 FIT, T = +40°C, U = 0.5 x U

Failure criteria according to DIN 44122.

dU/dt according to article table. For peak to peak

voltages lower than rated voltage (U

< U

), the

speciﬁed dU/dt can be multiplied by the factor U

+400 (±200) ppm/°C at 1 kHz

Approximately 6 nH/cm for the total length of capacitor

winding and the leads.

MMK

• Metallized polyester

• According to CECC 30401-042, IEC 60384-2, DIN 44122

typical applications

Bypassing, signal coupling. General

purpose for highest reliability.

construction

Metallized polyester ﬁlm capacitor. Radial

leads of tinned wire are electrically welded

to the contact metal layer on the ends of

the capacitor winding. Encapsulation in

self-extinguishing material meeting the

requirements of UL 94V-0.

technical data

∅ d

0.5

p d std l max l b

7.5 ± 0.4 0.6 4

20 ± 0.4

10.0 ± 0.4 0.6 6

-1

30 ± 0.4

15.0 ± 0.4 0.8 6

-1

30 ± 0.4

22.5 ± 0.4 0.8 6

-1

30 ± 0.4

27.5 ± 0.4 0.8 6

-1

30 ± 0.4

37.5 ± 0.5 1.0 6

-1

30 ± 0.7

p d std I max I b

5.0 ± 0.4 0.5 4

20 ± 0.4

7.5 ± 0.4 0.6 4

20 ± 0.4

10.0 ± 0.4 0.6 4

30 ± 0.4

15.0 ± 0.4 0.8 4

30 ± 0.4

22.5 ± 0.4 0.8 4

30 ± 0.4

27.5 ± 0.4 0.8 4

30 ± 0.4

37.5 ± 0.5 1.0 4

30 ± 0.7

Rated voltage U

, VDC

Rated voltage U

, VAC

Capacitance, µF

Capacitance tolerance

Category temperature range

Voltage derating

Rated temperature

Climatic category

Test voltage

Capacitance drift

Reliability

Maximum pulse steepness:

Temperature coefﬁcient

Self inductance

environMental test data

Damp heat test Test conditions: T = +40°C, RH = 93%, t = 56 days.

Test criteria: ∆ C/C ≤ ±5%,

∆ tanδ ≤ 0.005 (1kHz),

IR after test 0.5 x IR min.

Endurance test Test conditions: T = +100°C, U = 1.25 x (0.8 x U

Test criteria: t = 2000 h.

∆ C/C ≤ ±5%,

∆ tanδ ≤ 0.005 (1kHz)

∆ tanδ ≤ 0.010 (100kHz)

IR after test 0.5 x IR min.

Summary of content (13 pages)

PAGE 1
RoHS MMK Compliant • Metallized polyester • According to CECC 30401-042, IEC 60384-2, DIN 44122 L typical applications Bypassing, signal coupling. General purpose for highest reliability. Metallized polyester film capacitor. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. H 0.
PAGE 2
mmk Ordering information Technical data Dissipation factor tanδ Maximum values at +23°C C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF MMK5 C > 1.0 µF 1 kHz 10 kHz 100 kHz 0.8% 1.2% 2.5% 0.8% 0.8% 1.2% 1.5% 3.0% 1 kHz 10 kHz 100 kHz 0.8% 1.5% 3.0% 0.8% 1.5% MMK7.5 ... 37.5 Insulation resistance 1.0% See article table and pages 10 to 14 for options and article code construction.
PAGE 3
mmk article table article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.
PAGE 4
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J01 J02 J02 J02 J02 J03 J03 J04 J04 J05 J05 J06 J06 2.5 2.
PAGE 5
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 A01 A01 A01 A02 A02 A03 A04 A04 4.0 4.0 4.0 4.5 4.5 5.0 6.0 6.0 Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 63 vdc/40 VAC 63 vdc/40 VAC LEAd spacing 10 mm Lead spacing 37.5 mm 9.0 9.0 9.0 10.5 10.5 11.0 12.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.
PAGE 6
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K00 K01 K01 K01 K01 K01 K03 K03 K03 K03 K03 K04 K04 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 6.0 6.
PAGE 7
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 12 15 18 22 27 33 39 47 56 68 82 100 R05 R05 R05 R04 R04 R02 R03 R03 R06 R08 R08 R08 13.0 13.0 13.0 15.0 15.0 16.5 19.0 19.0 21.0 28.0 28.0 28.0 100 vdc/63 VAC 250 vdc/160 VAC Lead spacing 37.5 mm Lead spacing 7.5 mm 24.0 24.0 24.0 26.0 26.0 32.0 36.0 36.0 38.0 43.0 43.0 43.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 2 2 2 2 2 2 2 2 2 2 2 2 MMK37.5 126K100R05L4 TRAY MMK37.
PAGE 8
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 B04 B04 B05 B10 B10 B06 B06 B12 B14 B14 5.5 5.5 5.5 6.5 6.5 7.5 7.5 8.0 9.5 9.5 250 vdc/160 VA 400 vdc/200 VAC Lead spacing 15 mm Lead spacing 5 mm 10.5 10.5 12.5 12.5 12.5 14.5 14.5 15.0 17.5 17.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.
PAGE 9
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0078 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A01 A02 A03 A03 A04 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.5 5.0 5.0 6.
PAGE 10
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 K00 K00 K00 K00 K00 K00 K00 K00 K01 K01 K01 K01 K01 K01 K03 K03 K03 K03 K04 K04 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 6.0 6.
PAGE 11
mmk article table Capaci- Box Max dimen- Max tance code sions in mm dU/dt µF B H L V/µs Article code 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 J01 J02 J02 J02 J02 J02 J02 J03 J03 J03 J04 J05 J05 J06 J06 2.5 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 5.0 6.0 6.0 7.2 7.2 6.5 8.0 8.0 8.0 8.0 8.0 8.0 9.0 9.0 9.0 10.0 11.0 11.0 13.0 13.0 1000 vdc/250 VAC 1000 vdc/250 VAC Lead spacing 5 mm Lead spacing 15 mm 7.2 100 7.2 100 7.2 100 7.2 100 7.2 100 7.
PAGE 12
KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America
PAGE 13
Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.