Datasheet

19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3114_C4AQ • 7/29/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade)
Mounting
Resistance to Vibration and Mechanical Shock
AEC-Q200 Mechanical Stress Tests:
Mechanical Shock
MIL-SDT-202 Method 213
Test condition C
Peak value 100 g, duration 6 ms, half-sine-wave
(see MIL-HDBK for details)
Vibration
MIL-SDT-202 Method 204
5 g for 20 minutes, 12 cycles each of 3 orientations
Use 8"X5" PCB, .031" thick. 7 secure points on one
8" side and 2 secure points at corners of opposite
sides. Parts mounted within 2" from any secure point.
Test from 10 – 2,000 Hz.
The capacitors are designed for PCB mounting.
Thestand-offpipesmustbeingoodcontactwiththeprintedcircuitboard.
Thecapacitorbodyhastobeproperlyxed(e.g.clampedorglued).
Construction
Detailed Cross Section
Self-Extinguish-
ing Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal
Contact
Layer
Metal
Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin