Datasheet

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3114_C4AQ • 7/29/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade)
Qualication
Reference Standards IEC 61071, EN 61071, VDE0560
Climatic Category
55/105/56 according to IEC
60068-1
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and
conditions are referenced in document AEC-Q200, Stress Test Qualication for Passive Components. For additional information regarding the
Automotive Electronics Council and AEC-Q200, visit the AEC website at www.aecouncil.com.
General Technical Data
Dielectric Polypropylenemetallizedlm,non-inductivetype,self-healingproperty
Application DCltering,DClink
Special Features AEC–Q200qualied
Climatic Category 55/105/56 IEC 60068–1
Temperature Range −55°Cto+105°C
Endurance Test
500 hours + 500 hours at 1.3 x V
NDC
at70°C
500 hours + 500 hours at 1.3 x V
OP85
at85°C
500 hours + 500 hours at 1.3 x V
OP105
at105°C
Standard IEC 61071, EN 61071, VDE0560, AEC–Q200
Protection
Solvent resistant plastic case UL 94 V–0 compliant
Thermosetting resin sealing UL 94 V–0 compliant
Installation Any position
Leads Tinnedcopperwires-standardleadwirelength6(+0/−2)mm
Packaging Packedincardboardtrayswithprotectionfortheterminals
RoHS Compliance
Compliant with Directive 2002/95/EC and Directive 2011/65/EU of the
European Parliament and the Council of the EU on 8 June 2011, including
the Commission Delegated Directive (EU) 2015/863 that amended Annex
II to Directive 2011/65/EU.