Datasheet
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3114_C4AQ • 2/6/2018 3
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade)
General Technical Data
Dielectric Polypropylene metallized lm, non-inductive type, self-healing property
Application DC ltering, DC link
Special Features AEC–Q200 qualied
Climatic Category 55/105/56 IEC 60068–1
Maximum Operating Temperature +105°C
Endurance Test
500h + 500h at 1.3 x V
NDC
at 70°C
500h + 500h at 1.0 x V
OP85
at 85°C
500h + 500h at 1.0 x V
OP105
at 105°C
Standard IEC 61071, EN61071, VDE0560, AEC–Q200
Protection
Solvent resistant plastic case UL94 V–0 compliant
Thermosetting resin sealing UL94 V–0 compliant
Installation Any position
Leads Tinned copper wires - standard lead wire length 6 (+0/−2) mm
Packaging Packed in cardboard trays with protection for the terminals
RoHS Compliance
Compliant with the restricted substance requirements of
Directive 2011/65/EU
Electrical Characteristics
Rated Capacitance Range 1 to 210 µF
Rated Voltage (V
NDC
) Range 500 to 1,500 VDC
Capacitance Tolerance ±5% (J) or ±10% (K) measured at T = +25°C ±5°C
Dissipation Factor PP Typical
(tgδ0)
≤ 0.0002 at 10 kHz with T = 25°C ±5°C
Surge Voltage 1.5 * V
NDC
for maximum 10 times in lifetime at 25°C ±5°C
Overvoltage (IEC 61071)
1.15 * V
NDC
for maximum 30 minutes, once per day
1.3 * V
NDC
for maximum 1 minute, once per day
Peak Non-Repetitive Current 1.5 * I
PKR
, for maximum 1,000 times in lifetime
Insulation Resistance IR x C ≥ 30.000 seconds at 100 VDC 1 minute at T = +25°C ±5°C
Capacitance Deviation in
Operation
±2.0% max. on capacitance value measured at T = +25°C ±5°C
Temperature Storage −40 to +80°C
Storage time ≤ 36 months from the date marked on the label glued to the package
Permissible Relative
Humidity - Storage
Annual average ≤ 70%, 85% on 30 days/year randomly distributed
throughout year. Dewing not admissible.