Datasheet

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com F3046_C4AE_RADIAL • 1/5/2016 3
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
General Technical Data
Dielectric Polypropylene metallized lm - non inductive self-healing
Application DC ltering / DC-Link
Maximum Operating Temperature +105°C
Upper Temperature T
MAX
+85°C IEC 61071, Endurance Test Temperature
Lower Temperature T
MIN
-40°C
Protection
"Solvent resistant plastic case UL94 V-0
Thermosetting resin sealing UL94 V-0 compliant"
Installation Any position
Leads Tinned copper wires
Packaging Packed in cardboard trays with protection for the terminals
RoHS Compliant
Compliant with the restricted substance requirements of Directive
2002/95/EC
Electrical Characteristics
Capacitance tolerance ± 5% at +25°C
Dissipation factor (DF) ≤ 0.0002 at 10 kHz and +25°C (±5°C)
Surge voltage 1.5 * V
NDC
for maximum 10 times in life time at 25°C
Overvoltage (IEC 61071)
1.15 * V
NDC
for maximum 30 minutes - once per day
1.3 * V
NDC
for maximum 1 minute - once per day
Peak non Repetitive current 1.5 * I
PKR
- maximum 1000 times in life time
Insulation Resistance IR x C ≥ 30.000 seconds at 100 VDC 1 minute (+25°C)
Capacitance deviation in operation ±1.5% maximum on capacitance value measured at (+25°C)
Permissible relative humidity
Annual average ≤ 70%; 85% on 30 days/year randomly distributed
throughout the year. Dewing not admissible
Life Expectancy
Life expectancy 100.000 hours at V
NDC
@ Hot-Spot temperature T
HS
= +85°C
Capacitance drop at end of life -5% (typical)
Failure rate IEC 61709 300 FIT at V
NDC
@ Hot-Spot temperature T
HS
= +85°C
Test Method
Test voltage between terminals 1.5 * V
NDC
for 10 seconds or 1.65 V
NDC
for 2 seconds, at +25°C
Test voltage between terminals and
case
3.2 kVac 50 Hz for 2 seconds
Damp Heat IEC 60068-2-78
Change of temperature IEC 60068-2-14