Datasheet

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1054_HV_GOLDMAX_300_C0G • 8/20/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Radial Leaded Multilayer Ceramic Capacitors
High Voltage Goldmax, 300 Series, Conformally Coated, C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Ceramic Radial Tape and Reel Dimensions cont'd
Metric will govern
Variable Dimensions — Millimeters (Inches)
F
±0.78 (0.030)
1
P
1
±0.30 (0.012)
1
P
±0.3 (0.012)
P
2
±1.3 (0.51)
H
H
0
Straight Lead Con guration Formed Lead Con guration
2
Packaging C-Spec
3
7301/7305
7303/7317
7301/7305
7303/7317
2.54 (0.100) 5.08 (0.200) 12.7 (0.500) 6.35 (0.250)
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
4.32 (0.170) 3.89 (0.153) 12.7 (0.500) 6.35 (0.250)
5.08 (0.200) 3.81 (0.150) 12.7 (0.500) 6.35 (0.250)
5.59 (0.220) 3.25 (0.128) 12.7 (0.500) 6.35 (0.250)
6.98 (0.275) 2.54 (0.100) 12.7 (0.500) 6.35 (0.250)
7.62 (0.300) 2.24 (0.088) 12.7 (0.500) 6.35 (0.250)
9.52 (0.375) 7.62 (0.300) 12.7 (0.500) 6.35 (0.250)
10.16 (0.400) 7.34 (0.290) 25.4 (1.000) N/A
12.06 (0.475) 6.35 (0.250) 25.4 (1.000) N/A
14.60 (0.575) 5.08 (0.200) 25.4 (1.000) N/A
17.14 (0.675) 3.81 (0.15) 25.4 (1.000) N/A
1
Measuredattheegressfromthecarriertape,onthecomponentside.
2
Formedleadcongurationincludes:"shoulderbend","insidekink","outsidekink",and"snap-in".Formoreinformationregardingavailablelead
congurationssee"Dimensions"sectionofthisdocument.
3
The"PackagingC-Spec"isa4digitcodewhichidentiesthepackagingtype,leadlengthand/orleadmaterial.Whenordering,thepropercodemustbe
includedinthe15ththrough18thcharacterpositionsoftheorderingcode.See"OrderingInformation"sectionofthisdocumentforfurtherdetails.
Symbol Reference Table
D
0
Sprocket Hole Diameter
P
0
Sprocket Hole Pitch
P
Component Pitch
F
Lead Spacing
P
1
Sprocket Hole Center to Lead Center
P
2
Sprocket Hole Center To Component Center
H
Height to Seating Plane (Straight Leads Only)
H
0
Height to Seating Plane (Formed Leads Only)
H
1
Component Height Above Tape Center
∆H
Component Alignment
L
1
Lead Protrusion
t
Composite Tape Thickness
W
Carrier Tape Width
W
0
Hold-Down Tape Width
W
2
Hold-Down Tape Location