Manualshelf

Datasheet

ManualsBrandsKEMET ManualsCapacitorsCeramic capacitor Radial lead 33 nF 50 V 20 % (L x W x H) 3.81 x 2.54 x 5.08 mm 1 pc(s)
10111213141516171819
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1051_GOLDMAX_Z5U • 10/22/2015 17
Radial Leaded Multilayer Ceramic Capacitors
Goldmax, 300 Series, Conformally Coated, Z5U Dielectric, 25 – 250 VDC (Commercial Grade)
Ceramic Radial Tape and Reel Dimensions cont'd
Metric will govern
Variable Dimensions — Millimeters (Inches)
F
±0.030 (0.78)
1
P
1
±0.030 (0.012)
1
P
±0.3 (0.012)
P
2
±1.3 (0.51)
H H
0
Straight Lead Con guration
Formed Lead Con guration
2
Packaging C-Spec
3
7301 7303 7301 7303
2.54 (0.100) 5.08 (0.200) 12.7 (0.500) 6.35 (0.250)
16.0 ±0.5
(0.630 ±0.020)
18.0 (0.709)
Minimum
16.0 ±0.5
(0.630 ±0.020)
18.0 (0.709)
Minimum
4.32 (0.170) 3.89 (0.153) 12.7 (0.500) 6.35 (0.250)
5.08 (0.200) 3.81 (0.150) 12.7 (0.500) 6.35 (0.250)
5.59 (0.220) 3.25 (0.128) 12.7 (0.500) 6.35 (0.250)
6.98 (0.275) 2.54 (0.100) 12.7 (0.500) 6.35 (0.250)
7.62 (0.300) 2.24 (0.088) 12.7 (0.500) 6.35 (0.250)
9.52 (0.375) 7.62 (0.300) 12.7 (0.500) 6.35 (0.250)
10.16 (0.400) 7.34 (0.290) 25.4 (1.000) N/A
12.06 (0.475) 6.35 (0.250) 25.4 (1.000) N/A
14.60 (0.575) 5.08 (0.200) 25.4 (1.000) N/A
17.14 (0.675) 3.81 (0.15) 25.4 (1.000) N/A
1
Measuredattheegressfromthecarriertape,onthecomponentside.
2
Formedleadcongurationincludes:"shoulderbend","insidekink","outsidekink",and"snap-in".Formoreinformationregardingavailableleadcongurationssee
"Dimensions" section of this document.
3
The"PackagingC-Spec"isa4digitcodewhichidentiesthepackagingtype,leadlengthand/orleadmaterial.Whenordering,thepropercodemustbeincluded
inthe15ththrough18thcharacterpositionsoftheorderingcode.See"OrderingInformation"sectionofthisdocumentforfurtherdetails.
Symbol Reference Table
D
0
Sprocket Hole Diameter
P
0
Sprocket Hole Pitch
P
Component Pitch
F
Lead Spacing
P
1
Sprocket Hole Center to Lead Center
P
2
Sprocket Hole Center To Component Center
H
Height to Seating Plane (Straight Leads Only)
H
0
Height to Seating Plane (Formed Leads Only)
H
1
Component Height Above Tape Center
ΔH
Component Alignment
L
1
Lead Protrusion
t
Composite Tape Thickness
W
Carrier Tape Width
W
0
Hold-Down Tape Width
W
2
Hold-Down Tape Location