Datasheet

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4075_ALS70_71 • 7/15/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Screw Terminal Aluminum Electrolytic Capacitors – ALS70/71, High CV, +85°C
Termination Tables cont.
Termination
Code
Thread
Termination
Style
T
mm
T
inches
DT
mm
DT
inches
Thread Depth (TD)
mm/inches
Z
mm/inches
±0.5 ±0.019 ±0.5 ±0.019 Minimum Nominal
Standard Termination Option
A (D = 36) M5 x 0.8 Round 7.1 0.281 8 0.315 10/0.394
A (D > 36) M5 x 0.8 Oval 5.5 0.217 13 0.512 10/0.394 10/0.394
Other Termination Options
C M6 x 1.0 Round 5.5 0.217 13 0.512 10/0.394
G M6 x 1.0 Round 6.4 0.250 17 0.670 11.8/0.465
H 10-32 UNF class 2B Round 7.1 0.281 8 0.315 10/0.394
P (offset) M6 x 1.0 Round 7.1 0.281 13 0.512 10/0.394
U (offset)
M5 x 0.8 Round 7.1 0.281 13 0.512 10/0.394
Dimensions in mm and inches
L
SIDE VIEW OVAL
Termination Codes:
A
D
Optional Mounting
Stud (M x H)
+
DT
V
Safety Vent
TD
Polarity
Mark
Polarity
Mark
ROUND
Termination Codes:
A (D = 1.375), C, G, H
+
DT
V
W
W = 15.9 mm/0.626 inch
Safety Vent
TD
OFFSET
Termination Codes:
P, U
LT
S
T
(From Deck)
+
DT
V
Safety Vent
Polarity
Mark
Z
TD
Case Polarity
Due to the presence of electrolyte in the capacitor, the aluminum can and stud mounting will essentially be at the same
polarity as the negative terminal. We recommend that the stud and can be insulated (see accessories for insulating nuts).
Terminations
Aluminum inserts with M5 threads as standard, have a maximum torque 2NM. Optional M6 threaded inserts have a
maximum torque 4NM. Maximum torque for stud mounting M8:4NM and M12:8NM.