Datasheet

ManualsBrandsKEMET ManualsAluminium Polymer CapacitorsPolymer Capacitor 150 uF 6.3 VDC

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 4/16/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• ESR:4.5to70mΩ

• Voltage: 2 to 16 V

• Capacitance: 6.8 to 560 µF

• Polymer cathode technology

• High frequency capacitance retention

• Non-ignition failure mode

• 100% accelerated steady state aging

• 100% surge current tested

• Volumetriceciency

• Self-healing mechanism

• EIA standard case sizes

Overview

The KEMET Aluminum Organic Capacitor (AO-CAP)

is a solid state aluminum capacitor. The cathode is a

conductive organic polymer, which results in very low ESR

and improved capacitance retention at high frequency.

AO-CAPs may be operated at steady state voltages up to

100% of rated voltage without the need to de-rate.

Since there is no liquid electrolyte, the A700 offers long

operational lifetimes, low ESR, and high operational

temperatures. The inherent low ESR renders the A700

suitable for high ripple current handling. The small

package size, high ripple current capability, high operating

temperature, low parasistics, and high capacitance makes

the A700 ideal for high performance microprocessor, FPGA,

and ASIC decoupling designs.

Aluminum Organic Capacitor (AO-CAP)

A700 Polymer Aluminum, 2 – 16 VDC

Applications

Typical applications include DC/DC converters, notebook PCs, telecommunications, displays, and industrial applications.

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (18 pages)

PAGE 1
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer, which results in very low ESR and improved capacitance retention at high frequency. AO-CAPs may be operated at steady state voltages up to 100% of rated voltage without the need to de-rate.
PAGE 2
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information A 700 V 476 Capacitor Class Series Case Size Capacitance Code (pF) 700 = Aluminum Polymer D V X First two digits represent significant figures.
PAGE 3
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Qualification Test Condition Characteristics Δ C/C Endurance 105°C/125°C** at rated voltage, 2,000 hours*** ≤ initial limit DCL Within 1.25 x initial limit ESR Within 2.
PAGE 4
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency A700V686M006ATE018_Imp A700D157M006ATE015_Imp A700X187M006ATE010_Imp A700V686M006ATE018_ESR A700D157M006ATE015_ESR A700X187M006ATE010_ESR 10 1 100 Capacitance (µF) Impedance, ESR (Ohms) 100 0.1 A700V686M006ATE018 10 A700D157M006ATE015 A700X187M006ATE010 0.01 0.
PAGE 5
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Table 1 – Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.
PAGE 6
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.
PAGE 7
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.
PAGE 8
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.
PAGE 9
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Derating Guidelines Voltage Rating Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) −55°C to 125°C 2 V ≤ VR ≤ 16 V VR VR VR = Rated Voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device.
PAGE 10
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Reverse Voltage Polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below table. Please note that these parts may not be operated continuously in reverse, even within these limits.
PAGE 11
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case.
PAGE 12
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Construction Polarity Stripe (+) Molded Epoxy Case Detailed Element Layer View Silver Polymer (Third Layer) (First Layer) Leadframe (− Cathode) Carbon (Second Layer) Aluminum Leadframe (+ Anode) Silver Epoxy Molded Epoxy Case Capacitor Marking KEMET Aluminum Polymer Polarity Indicator (+) Date Code * 1 digit = Last number of Year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 =2019 2nd and 3rd digit = Week of the Year 01 = 1st week o
PAGE 13
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.
PAGE 14
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0.
PAGE 15
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel.
PAGE 16
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply.
PAGE 17
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Str
PAGE 18
Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 16 VDC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.