Assembly Instructions

Be sure to check all packing material carefully for small parts, which may have come loose inside
the carton during shipment.
ASSEMBLY STEPS :
1. Carefully place the Media Chest on its back on a clean, soft surface such as a blanket or carpet.
2. Assemble the Center Foot (D) on the bottom of the Media Chest, as shown.
3. Using two people, carefully set the Chest upright and move to the desired location in the room.
Note:
The Adjustable Shelves (A),(B) have been installed for shipping. These are secured using the
Screws underneath the shelf. In order to move the Shelves to a different location, using your
Phillips screwdriver, remove the screws and move the Shelf Pins and Shelves as desired.
4. Insert the Shelf Pins (F) into the holes of the End Panels at the desired levels. Place the Adjustable
Shelves on the Shelf Pins. The screws do not need to be reinstalled.
5. There are levelers located under the corners of the Media Chest and Center Foot which can be
adjusted if necessary to compensate for uneven flooring.
Made in Vietnam
Page 1 of 2
A
B
Assembly Instructions
2 pcs.
D
4 pcs.
Middle Adjustable Shelf
(installed)
End Adjustable Shelf
(installed)
1 pc.
E
24 pcs.
F
24 pcs.
G
1 pc.
Components and Hardware List
F
E
A
B
C
Bedroom
Media Chest