User Manual

•
Example: Place this source on key 2. Press up on the Nav Pad 3 times —!this increments the
counter to 3 —!then step on key 2. The resulting value will be 32, or (3 x 10) + 2.
Key 0-9 Pressed
Outputs a 127 when the corresponding key is pressed —!e.g. Key 4 Pressed will output a 127
whenever key 4 is pressed. This source is great for turning other keys’ LEDs on/off.
Other Key Pressed
Placing this on a key will output a 127 when a different key is pressed, and output a 0 when the key
this is assigned to is pressed. Example: place this on key 2 —!it will output a 0 when key 2 is pressed
and output a 127 when any other key is pressed.
Modline 1-6 Output
Uses the final output value from another modline (1-6) and sends it through the modline this
source is assigned to. Great if any extra data processing for more complex setups is needed.
MIDI A-H
(Hosted mode only)
Receives the values from the MIDI inputs assigned in the Settings window and passes them
through the modline.
OSC A-H
(Hosted mode only)
Receives the values from the OSC inputs assigned in the Settings window and passes them
through the modline.
Appendix 57