User Manual

On Threshold
Sets the amount of pressure necessary to consider the key “on” (or “triggered”). Higher
values require more pressure — lower values require less pressure.
Off Threshold
Sets the amount of pressure necessary to consider the key “off” (or “released”). Higher
values will make the key turn off sooner (pressure doesn’t have to drop much) — lower
values will make the key turn off later (pressure has to drop very low).
Nav Pad Section
The Nav Pad options behave exactly the same way as their normal key counterparts. The only
difference is there are options for each direction of the Nav Pad —!north, south, east, west.
4.4.4 I/O Tab
The I/O tab contains MIDI and OSC input options.
MIDI Input
(Hosted mode only)
The MIDI Input section contains options for receiving
MIDI from other connected MIDI devices or software.
There are 8 MIDI inputs available — A through H.
These can be accessed in the modlines by using the
MIDI A-H sources.
Enables
Enables/Disables this MIDI input.
Device
Sets the MIDI device to receive data from.
Channel
Sets the MIDI channel to listen for. All MIDI
coming in on other channels will be ignored.
Message Type
Sets the message type to listen for. All other message types will be ignored. The following
options are available:
•
Note: Listens for MIDI notes.
•
CC: Listens for CC messages.
•
Program Change: Listens for program change messages.
GLOBAL KEYS I/O
PEDAL
SETTINGS
A
B
C
D
A
B
C
D
E
F
G
H
E
F
G
H
1 60 0
0
0
0
0
0
0
0
60
60
60
60
60
60
60
1
1
1
1
1
1
1
Note
Note
Note
Note
Note
Note
Note
Note
0
0
0
0
0
0
0
127 0 0 1 7000 7001
0
MIDI Input
OSC Input
Sending IP Address
out port
enable
prefix value
enable
prefix value
in port
Advanced Editor 45