Operation Manual

Expression Pedal Lock Off: The display briefly shows as follows and the

expression pedal is unlocked.

Note:

When the EXP Lock is turned on and the expression pedal is used, the

display briefly shows as follows.

3.8 External Sequencer Start/Stop

You can start and stop the external sequencer connected to the MP4 with

SW button.

First, connect an external sequencer to the MIDI OUT jack on the rear panel

of the MP4. Make sure that the sequencer is capable to receive external

MIDI clock and commands. Check the MIDI implementation chart of the

sequencer if the Recognized column of the System Real Time Clock &

Commands is marked “O (yes)”. Consult the owner’s manual of the

sequencer how to set the sequncer to receive external MIDI clock and

commands.

When the SW button is lit the MIDI clock is transmitted

External Sequencer Start: Press the SW button to turn the light on. The

display briefly shows as follows and the external sequencer starts.

External Sequencer Stop: Press the SW button to turn the light off. The

display briefly shows as follows and the external sequencer stops.

Note:

The tempo is controlled by the Metronome tempo of the MP4. See page

14 for details.

External Seq

Off

EXP Lock

>Press[SW]button

EXP Lock

Off