Operation Manual

Speaker Assignment

Press the Speaker Assignment button and the display changes to a menu showing the seven

selectable sounds. Piano sounds are shown on left side. Organ sounds are shown on right. Any

sound you choose will offer these same options.

Change Assignment

After you have entered SYSTEM MODE and have selected Speaker Assignment using the

appropriate select button, the display will show the seven PIANO and ORGAN sounds. Press the

PIANO 1 select button. The Internal box will be highlighted to indicate that the LH-2's internal

speaker system is now active for this sound. Press the All Speakers function button to change this

assignment. Once All Speakers is selected, the LH-2 will send sound to both the internal speakers

and the external outputs (where optional external powered speakers can be connected).

Now, press the BACK button three (3) times. With the third press, a window will open that says

"Saving The Data Please Wait !" Once this statement disappears, the change will have been made

in the LH-2's computer memory. The PIANO 1 sound will then be heard through the internal

speakers and any optional external powered speakers that are connected to the Line Out jacks.

If you re-enter the SYSTEM MODE to check the Speaker Assignment, you should see that the All

Speakers box is highlighted for PIANO 1. To return to the original setting, select Internal and

press the BACK button three (3) times to save the new setting and exit.

You can use this process to select a separate Speaker Assignment for each of the LH-2's seven

sounds.