Operation Manual

FIRST INSTALLATION

Select your country using the



buttons. Then select “Time Zone Selection” using the



buttons. Using the



buttons, select your time zone (“0” = UMTC (formerly Greenwich

Mean Time GMT), “+1” = Central European winter time, “+2” = Central European summer time).

If the “Automatic” setting is used, the receiver selects the time zone based on the data transmitted.

Select “Next” using the



buttons and conﬁ rm your selection by pressing the



button to open

the next menu. The following display appears:

Select the “Off” setting using the



buttons if you are not using an active antenna or the

“On” setting if you are using an active antenna (such as BZD 30) for the reception of the DVB-T signals.

Change to the “Check Signal Strength” line using the



buttons and press the



button. A display

appears where you can check your antenna settings again using the



buttons.

If you do not know the settings or

components used in your reception

system, ask a specialist engineer!

You can see the actual quality of your DVB-T signal in the Signal Strength and Signal Quality bars.

In the “New channel” line you can also test the signal on different channels. To leave the menu

press the



button.

Select “Continue” using the



buttons and conﬁ rm your selection by pressing the



button to open

the next menu. The following display appears: