Operation Manual

24
Select Satellites - Tuner 1
Go to the “Select Satellite” line. Press the

button.
The following on-screen display appears (example):
Connection and setup
If you subsequently want to delete the set borders, switch to the “Reset border positions” f eld and press
the

button to con f rm deletion of the borders. You can now set new values for the limits. Once you
have set all the borders, press the

button.
Here, select up to 64 satellites to be
included in the signal on Tuner 1. Select
the satellite you want and con f rm your
selection with the

button. The selected
satellites will be identif ed with a tick.
When you have selected the desired satellites, press the

button.
Confi gure Satellites
Go to the “Conf gure Satellites” line. Press the

button.
The following on-screen display appears (example):