Operation Manual

48 from 64
During this process refer to the
operating manual for your TV set
and take care to select only those
settings that your TV set can pro-
cess.
Press the

(green) button to move to the next menu.
The following on-screen display appears:
Use the

keys to make the basic settings for
the video and audio output of the receiver to the
TV set.
Video Output via
The rear panel outputs video via the HDMI socket on the unit's rear panel.
HDMI / YPbPr Resolution
Here you can select the video resolution that will be output at the TV set. The following selection options
are available:
● 1080p (resolution 1920 x 1080, full-screen images)
● 1080i (resolution 1920 x 1080, half-screen images)
● 720p (resolution 1280 x 720, full-screen images)
● 576p (resolution 720 x 576, full-screen images) or
● Automatic
Force 576i (must be supported by the TV set otherwise you will not see a TV picture)
You can only and need only make this setting if you have selected the setting "Automatic" for "HDMI/
YPbPr Resolution". If for a programme that is transmitted in the format 720 x 576 (standard TV), the origi-
nal format is to be transmitted to the TV set, select the "On" setting. If the setting is "Off", the programme
may be automatically scaled up to the HDTV format 720p by the receiver.
HDCP for free channels
Select here whether HDCP (digital copy protection) is to be constantly set to "On" with free channels or is
not to be activated, "Off".
TVcontrolboxviaHDMI(CEC)
If you select “Off“, the TV set must be switched on or off separately. If you select “On“, the TV set will be
switched on automatically as the receiver starts up (but only if the TV set was in standby mode). If the
receiver is switched off into standby mode, the TV set will also be switched to standby mode.
The automatic switching on and off of the TV set by the receiver only functions if the TV set supports this
function.
First installation