Instructions / Assembly

330 CENTRAL AVENUE, CLARK, NJ 07066
732-388-0300 • 800-526-4236 • FAX: [phone]
WEB: http://www.karnakcorp.com
Roofing
Roofing
9
Read Material Safety Data Sheets before using this product.
FM1010
DESCRIPTION:
Karnak #16AF Double Coverage Cement is manufactured from a blend of selected asphalts,
mineral fillers and refined solvents. This composition is then passed through a high speed mixer
which provides a smooth consistency product, free of foreign matter and lumps.
USES:
1.Lap cement
2. Rolled roofing adhesive
3. Blind nailing cement
SPECIFICATIONS:
ASTM D-3019 Type III
SURFACE PREPARATION:
Karnak #16AF Double Coverage Cement is applied by brush, broom or squeegee. The area to
be coated must be free and clean of all debris, dust and dirt.
COVERAGE:
Under normal conditions, Karnak #16AF Double Coverage Cement should be applied at the
rate of 2 to 3 gallons per 100 sq. ft.
CAUTION:
Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do
not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep
out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an
environmentally safe manner. Cover air intakes during application and while drying.
CARE OF TOOLS:
Tools may be thoroughly cleaned after use with mineral spirits or petroleum solvents, taking the
due precautions necessary when handling combustible materials.
PACKAGING:
Available in 5 gallon pails and 1 gallon pails.
If further information is needed, contact Karnak Technical Services at
1-800-526-4236.
Please see page 212 for additional mold and safety information.
16AF Double Coverage Cement