Indoor Air Quality Monitor Software MODEL S221-00 Operation Manual Please read this operation manual carefully and understand the warnings described in this manual before operating the product. Keep this manual handy for future reference. 01002 07.11 No.
All of our products have gone through inspection based on our quality assurance system prior to shipment. However, in case a defect in materials/workmanship or damage due to a transportation accident is found, please contact your local distributor, or call our service desk. - This manual is stored as a in a CD-ROM as a PDF file, which can be read by “Adobe Acrobat 4.x” and higher. - Windows 9x/NT/2000/XP is a registered trademark of Microsoft Corporation.
Table of Contents 1. OVERVIEW ................................................................................................................................................. 1-1 1.1. 2. INSTALLATION .................................................................................................................................................. 2-1 2.1. 2.2. 2.3. 3. Installation ............................................................................................................................
1. OVERVIEW 1.1. System Overview This software allows users to collect data from IAQ Monitor, display the data in a graph and store it as a file on a computer. It also allows transferring the data stored in the IAQ Monitor to the computer, and storing it in a file. Applicable Computer Requirements: Model RS232C Communication Port OS IBM PC compatible (DOS/V) To be equipped with more than one port.
2. INSTALLATION 2.1. Installation When performing installation, make sure to log in with the user having administrative right and follow the procedure below. (1) Execute “Setup.exe” located in the [Japanese] [English] folder in the product CD-ROM. (2) Follow the directions shown on the screen. (3) When the installation is completed successfully, “Kanomax” will be added in the [program] of the [Start Menu]. 2.2.
3. GETTING STARTED 3.1. Communication Setting 1. Confirm COM Port Number on the computer being connected by the communication cable. (It can be confirmed by selecting [Control Panel] from Start Menu [System] [Device Manager].) 2. Confirm the baud rate on the IAQ Monitor. How to confirm is descried in the operation manual for IAQ Monitor. The default value is 9600. 3. Startup the software, and select [Setup] from the menu bar [RS232C]. RS232C window shown below will be displayed.
3.2. Main Screen Features on the main screen are described below. 3.3. Menu List File Menu: Used for operations concerned with files. [Save as…] [Exit] Stores measurement data in a CSF formatted file. Terminates the program. Setup Menu: Used for setting various parameters. [RS232C] [Option] Sets RS232C setting. Sets the folder for stored data. Measurement Menu: Used for setting various parameters for performing a measurement. [Set] Sets the parameter for performing a measurement.
3.4. Command Button Measure Start: Starts sampling in accordance with the conditions set in the measurement [Set]. When starting for the second or subsequent time, a message of “Data is not saved. Does it save?” will be displayed if the former data has not been stored. When [Yes] is clicked, a window for data storage will be displayed. Store the data. To perform sampling, click [Measure Start] again. When [No] is clicked, the previous data will be deleted and new sampling will start.
3.6. Option Save Folder of Data: Sets the folder where the calibration result has to be saved. Either input the folder name directly or select the folder by clicking the reference […] button. * The default setting for the location where the data is to be saved is “C:¥”.
4. MEASURING AND DATA TRANSFER 4.1. How to Make a Measurement How to read data in real time when IAQ Monitor is connected to the computer is described below. 1. Set the communication setting as instructed in the previous chapter. Then from the menu click [Measurement] [Set]. 2. The window like the one shown below will be displayed. Then set the setting and click [OK]. Mode Sampling Time Number of Data Graph Choose data items to be retrieved.
4.2. How to Transfer Data How to transfer the measurement data stored in the IAQ monitor to a computer is described below. 1. Set the communication setting as instructed previously, and click [Data Transfer] button located at the right bottom of the main screen. 2. The window similar to the one below will be displayed. Then select the page number and the measurement mode (Standard or Detailed) of the data needed to be read, and click [Transmit] button.
5. HELP By selecting [Help] [About IAQ Monitor Software], the above window will be displayed.
6. FILE DESCRIPTION Sampled data and transferred data can be stored with a random file name. 6.1. Sampled Data Storage File File Name: random file name.csv Content Format: CSV file format text file Date,2004/02/24 Time,12:00:00 Data,9999 Sampling Time,1 Mode,NORMAL Atmos.Pressure,1013 CO,CO2,Temperature.
6.2. Transferred Data Storage File File Name: random file name.csv Content Format: CSV file format text file [Calculation] data Date,2004/02/24 Time,12:00:00 Data,9999 Sampling Time,1 Mode,CALCULATION(INS) Atmos.Pressure,1013 CO,CO2,Temperature.
6.3. IAQ.INI File Data such as parameters necessary for starting up the software is stored. Caution! If this file is deleted, the software will be initialized. * Please be noted that deleting or modifying any files except CSV formatted files in “C:¥Kanomax¥IAQMonitor” may cause malfunctioning of the software.
7.TROUBLESHOOTING 7.1. Startup of RS232C setup window is slow. The setup window is displayed after searching for RS232C port equipped to the computer. Since the required time is dependent on factors such as the computer’s processing speed, please wait for the window to be displayed. 7.2. Operation failure under Windows 9x systems or Windows NT. The operation of this software is guaranteed only for running under Windows 2000/XP. Please prepare a Windows 2000/XP computer for proper use. 7.3.
8. CONTACT INFORMATION U.S.A. & Europe KANOMAX USA, INC. PO Box 372, 219 Route 206, Andover, NJ 07821 U.S.A. TEL: (800)-247-8887 / (973)-786-6386 FAX: (973)-786-7586 URL: http://www.kanomax-usa.com/ E-mail: info@kanomax-usa.com Japan & Asia KANOMAX JAPAN INC. 2-1 Shimizu Suita City, Osaka 565-0805, Japan TEL: 81-6-6877-0183 FAX: 81-6-6877-5570 URL: http://www.kanomax.co.jp/ E-mail: sales@kanomax.co.jp China Shenyang Kano Scientific Instrument Co., Ltd No.