ｑｗ ANEMOMASTER MODEL 6036 Data Acquisition Software (6036-41) PC-LINK Software (6036-45) Operation Manual 01001 1203
Precautions When Using Kanomax Software Products in Windows Vista or 7 1. Setting icon of the software : 1. Click [Start] -> [ALL Programs] -> [KANOMAX] or right-click the desktop icon of the software. 2. Right-click the icon of the software and click [Properties], or click [Properties] of the desktop icon. 3. Click the [Compatibility] tab in the Software Properties window. 4. Check “Run this program as an administrator” under Privilege Level. 5. Click [OK] to close the window.
2. For Stored data: Stored data may not appear in Windows Explorer if it was saved in the C:\ folder or one of the folders in Program Files (Program Files(x86) for 64 bit). Click “Compatibility files” in Windows Explorer to display the data. If you cannot perform this operation, or “Compatibility files” does not appear, you need to save the data in a folder such as “My Documents” which users can read and write to.
Table of Contents 1. Overview................................................................................................................... 1 1.1 System Overview.......................................................................................................................1 1.2 Software Operating Requirements..........................................................................................1 1.3 Hardware Connection ..........................................................................
1 1. Overview 1. Overview 1.1 System Overview Data Acquisition Software (6036-41) for ANEMOMASTER MODEL 6036 is used to remotely control the Anemomaster while directly connected to a computer. Real time data is displayed on screen and the collected data can be stored in either “.csv” or “.txt” format”. Note: Stored files cannot be opened and viewed using the Data Acquisition Software. They can be viewed using a compatible program such as MS Excel for “.csv” format or MS Word for “.txt” format.
3. Data Acquisition Software (S603-60) 2 2. Software Installation When installing the software, be sure to log in with the user having administrative rights and follow the procedure below. 1)Before installing the software, close any running programs. [NOTE] If a previous version of this software is already installed on the computer, it must be uninstalled prior to installing the new version. 2)Insert the CD-ROM into the computer. Then double-click the “Setup.exe”.
3. Data Acquisition Software (S603-60) 7)You are now ready to install the software. Click “Next” to start installation. 8)When the installation is complete as shown in the right figure, click “Finish”.
3. Data Acquisition Software (S603-60) 4 3. Installing Device Driver 3.1 Device Driver Installation When installing the software, be sure to log in with the user having administrative rights and follow the procedure below. When you connect the ANEMOMASTER MODEL 6036, “Found New Hardware Wizard” window will be displayed. Install the device driver following the procedure below. To install the device driver, be sure to insert the product CD-ROM into the CD-ROM driver. 3.1.
3. Data Acquisition Software (S603-60) 4) After installation starts, the dialog shown on the right will be displayed. Click [Continue Anyway]. 5) When installation completes, the screen shown on the right will be displayed. Click [Finish].
3. Data Acquisition Software (S603-60) 3.1.2 Windows Vista 1) The “Found New Hardware” wizard will appear. Confirm that the installation disk is inserted in the CD-ROM drive and click “Locate and install drive software (recommended)”. 2) The ‘User Account Control” dialogue will pop up. Click “Continue”. 3)Please wait while “Installing device drive software” message is being displayed in the lower right of the screen. 4)The “Found New Hardware” dialogue will appear. Click “Next”.
3. Data Acquisition Software (S603-60) 3.1.3 Windows 7 1)Please wait while “Installing device driver software” message is being displayed in the lower right of the screen. 2)In a short time, “Device drive software was not successfully installed” message will appear. 3)Click “Start” Æ “Control Panel” Æ “Hardware and Sound”. 4)Click “Device Manager”. 5)After opening the Device Manager window, confirm that “KANOMAX Anemo Master Model 6036” is listed in “Other Device” and right-click it.
3. Data Acquisition Software (S603-60) 6)Click “Browse my computer for driver software”. 7)Type the name of the CD-ROM drive in “Search for driver software in this location:” box and click “Next”. 8) In the resulting “Windows Security” dialogue, click “Install this driver software anyway” to start the installation of the driver software. 9) When the installation is complete as shown in the right figure, click “Close”.
9 3. Data Acquisition Software (S603-60) 4. Data Acquisition Software (6036-41) 4.
10 3. Data Acquisition Software (S603-60) 4.2 Measurement 4.2.1 Starting a Measurement 1) Click [Measurement] -> [Measurement] from the menu bar. (Or click the button from the tool bar or press F4 key.) 2) “Measuring Parameter Setting” dialog box will be displayed. Configure each setting for a measurement. Sampling Method Serial No.
11 3. Data Acquisition Software (S603-60) 4.2.2 Stopping a Measurement 1) Click [Measurement] -> [Measurement Stop] from the menu bar. (Or click button on the tool bar or press F5 key.) 2) A confirmation window will ask you if you want to stop a measurement. (B) 3) To stop a measurement click [Yes] (B).
12 3. Data Acquisition Software (S603-60) 4.2.3 Displaying Measurement Data Data mark line ¾ ¾ Click the data mark line on the graph to indicate the corresponding data record in the data sheet. Click the data on the data sheet to move the data mark line to the corresponding position on the graph. [Note] This software does not have a function to redisplay any stored measurement data. Once data is saved, the measurement data cannot be displayed in the above format.
13 3. Data Acquisition Software (S603-60) 4) Set the Y axis (vertical axis) that indicates air velocity. (b) 5) After setting X and Y axis, click [OK]. (c) The flow rate graph setting (scale) will be set automatically. 4.2.5 Data Save 1) To save a measurement data click [File] -> [Save]. (Or click button on the tool bar or press F3 key.) 2) [Save As] window will be displayed. (a) (c) (b) (d) 3) Enter a file name. (a) 4) Select the format (“*.CSV” or “*.
14 3. Data Acquisition Software (S603-60) 4.3 Example of Saved Data 4.4 Display Language Display language can be selected from English or Japanese from the [View] menu. 4.5 Software Information To check the name, version and copyright information of the software click [Help] -> [About]. The below window will be displayed.
4. PC-LINK Software (S603-01) 15 5. PC-LINK Software (6036-42) 5.
4. PC-LINK Software (S603-01) 16 5.2 Data Acquisition 5.2.1 Acquiring Data from Anemomaster Set the Anemomaster to the measurement mode where the data to be acquired is saved. For example, if you want to download an air velocity data to your computer, set the Anemomaster to an air velocity measurement mode. Note: Ensure that you have stored measurements in your Anemomaster before running this program. (See Anemomaster operation manual for instructions on storing measurements.
4. PC-LINK Software (S603-01) 17 5.3 Example of Stored Data 5.4 Error Message 1) File Name Error Before acquiring data, you need to enter a file name. When you try to acquire data without entering a file name, this message will be displayed. 2) Drive Error When the selected drive cannot be access, this message will be displayed.
5. Troubleshooting 18 6. Troubleshooting ¾ Communication error message is displayed. Refer to “Setting the Measurement Unit and Baud Rate” in the User’s Manual of ANEMOMASTER MODEL 6035/6036(P.21) and set the Baud rate of the instrument to 19200bps. Confirm the communication settings. Make sure that the computer is connected to the Anemomaster with a communication cable. After making proper connection, close the software and reboot it.
6. Contact Information 7. Contact Information U.S.A. & Europe KANOMAX USA, INC. PO Box 372, 219 US Hwy 206, Andover, NJ 07821 U.S.A. TEL: (800)-247-8887 / (973)-786-6386 FAX: (973)-786-7586 URL: http://www.kanomax-usa.com/ E-mail: info@kanomax-usa.com Japan & Asia KANOMAX JAPAN, INC. 2-1 Shimizu Suita City, Osaka 565-0805, Japan TEL: 81-6-6877-0183 FAX: 81-6-6877-5570 URL: http://www.kanomax.co.jp/ E-mail: sales@kanomax.co.jp China Shenyang Kano Scientific Instrument Co., Ltd No.
