Sconce INSTALLATION INSTRUCTIONS P34421 1149476_2_A 1 of 5 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Sconce INSTALLATION INSTRUCTIONS Thank You For Choosing KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. Before You Begin DANGER: Risk of personal injury.
Sconce INSTALLATION INSTRUCTIONS 1. Connect the Electrical Wires Fixture Ground Outlet Plastic Wire Nut Bare Green or Bare Copper Neutral White White Black Black Hot DANGER: Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker or fuse box before attempting any installation procedure. DANGER: Risk of personal injury. To avoid possible electrical shock, the outlet box must be properly grounded.
Sconce INSTALLATION INSTRUCTIONS 2. Install the sconce assembly Outlet Box Decorative Mounting Screws Wires Sconce Assembly Carefully tuck the wire connections neatly into the outlet box. Align the mounting holes in the sconce assembly with the holes on the outlet box as shown. Attach the sconce assembly to the outlet box with the decorative mounting screws.
Sconce INSTALLATION INSTRUCTIONS 3. Install the shade and bulb Clip Groove Glass Shade Bulb Bulb Socket Sconce Assembly Insert the bulb into the fixture. Position the glass shade over bulb socket. Make sure the clip on the back of the shade rests in the groove. Turn on the main electrical supply from the main fuse or circuit breaker. Check for proper operation.
