User's Manual
98
Operations
The camera has the Built-in Viewer.
Enter the IP address of camera in the address bar of Internet Explorer. The Built-in Viewer allows
H.264/JPEG/MPEG-4 data monitoring and digital PTZ operations.
䡵 When you are using the JPEG data compression, you can display a series of still images and record
still images.
䡵 Audio can be sent and received via the Built-in Viewer. (This function is only available on VN-H57U/
H257U/H257VPU/H157WPU.)
䡵 You can operate PTZ (Pan, Tilt, Zoom) function using a mouse.
● If you click the mouse on the screen, the clicked spot will be the center of the display area.
● You can manipulate zooming by rotating the mouse wheel.
Memo:
● The first time you display the Built-in Viewer in Internet Explorer, the viewer will be installed on the
computer.
⽧Screen Configuration (APage 99)
⽧Picture Quality Setting (APage 101)
⽧PTZ Settings (APage 104)
⽧PTZ Control (APage 106)
⽧Unicast Settings (APage 108)
⽧Multicast Settings (APage 110)
⽧On Screen Display Settings (APage 112)
⽧Settings related to Audio Monitor
(APage 118)
⽧Other Setting (APage 120)
⽧Exiting the Built-in Viewer (APage 121)
Built-in Viewer Operations
If the display or configuration of the open window appears strange, check the computer
settings as follows:
A Select [Start] - [Control Panel] - [Appearance and Personalization]
B Select [Display] - [Adjust screen resolution]
C Check that [Resolution] is set to [Monitor size (recommended)].
D Otherwise, change the setting to [Monitor size (recommended)] and press the [OK] button.
E In [Display Settings], press the [Keep changes] button.