TK-S215_EN.book Page 1 Tuesday, March 28, 2006 9:39 AM DOME CAMERA TK-C210FW TK-C215V4 TK-C215V12 INSTRUCTIONS For Customer Use: Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. TK-C210FW/TK-C215V4/TK-C215V12 Serial No.
TK-S215_EN.book Page 2 Tuesday, March 28, 2006 9:39 AM Introduction Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life.
TK-S215_EN.book Page 3 Tuesday, March 28, 2006 9:39 AM I INFORMATION FOR USA 䡵 INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TK-S215_EN.book Page 4 Tuesday, March 28, 2006 9:39 AM Introduction (continued) These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. 2. 3. 4. Read all of these instructions. Save these instructions for later use. All warnings on the product and in the operating instructions should be adhered to. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5.
TK-S215_EN.book Page 5 Tuesday, March 28, 2006 9:39 AM Thank you for purchasing this product. (These instructions are for: TK-C210FWE, TK-C215V4U/E, TK-C215V12U/E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained.
TK-S215_EN.book Page 6 Tuesday, March 28, 2006 9:39 AM Introduction (continued) Contents Introduction Safety Precautions .......................................... 2 Characteristics ................................................ 5 Contents.......................................................... 6 Operating Precautions .................................... 7 Name of Parts ................................................. 8 Camera........................................................
TK-S215_EN.book Page 7 Tuesday, March 28, 2006 9:39 AM Operating Precautions 䢇 To save energy, when it is not being used turn the system’s power off. 䢇 This camera has been designed for indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the following places. ● In a place exposed to rain or moisture. ● In a place with vapor or oil soot, for example in a kitchen. ● In a temperature outside the operating temperature range (-10 f to 50 f).
TK-S215_EN.book Page 8 Tuesday, March 28, 2006 9:39 AM Introduction (continued) Name of Parts Camera I H G TK-C215V12 only A F B B E C A D A Mounting hole (elliptical) x 4 Use these when mounting the camera to the electrical box. (A pg. 22) NOTE: When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hole (round) x 4 Use these when mounting the camera to the ceiling or wall. (A pg.
TK-S215_EN.book Page 9 Tuesday, March 28, 2006 9:39 AM Camera (Interior) The picture below shows the camera when the dome cover and outer case are removed. Procedures for removal. (A pg. 18 AEmbedding the camera to the ceilingB, Step 3. to Step 4.) U Lens (A Next page) T S R J K L Camera Unit (Rear) V N Q P O N M *TK-C215V4 is used in the above illustration J Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera.
TK-S215_EN.book Page 10 Tuesday, March 28, 2006 9:39 AM Introduction (continued) A [RESET/SPOT] RESET/SPOT button Setting the Lens and Switches (TK-C215V4) Set the video setting switches on the camera unit before mounting it. To set the switches, use a fine-tipped screwdriver. A RESET/ [SPOT] B R B [R/B, +/-] R/B, +/- adjustment button B LL PHASE C 1 2 3 4 5 6 7 8 D E This button is pressed when manually adjusting the white balance or when adjusting the vertical phase of the line lock.
TK-S215_EN.book Page 11 Tuesday, March 28, 2006 9:39 AM ● Sensitivity increases in the case of blackand-white images. The screen may therefore appear rougher and white spots may increase. 3. [SYNC] Synchronization system selection 4. switch. This switch sets the synchronizing system for the camera. INT: This is set for internal synchronization LL (Line Lock): The camera’s vertical synchronization is locked to the AC 24 V power line frequency.
TK-S215_EN.book Page 12 Tuesday, March 28, 2006 9:39 AM Introduction (continued) B [ZOOM/FOCUS, MEMORY] zoom, focus Setting the Lens and Switches (TK-C215V12) RESET/[SPOT] R B LL PHASE IRIS L TELE ZOOM/FOCUS NEAR ALARM POSITION 2 FAR WIDE 4 POSITION SELECT 1 2 3 4 5 6 7 8 A B C D LEVEL [MEMORY] WHT.BAL. H Set the video setting switches on the camera unit before mounting it. To set the switches, use a fine-tipped screwdriver.
TK-S215_EN.book Page 13 Tuesday, March 28, 2006 2. [SELECT] WHT.BAL./PHASE setting switch. 3. 4. WHT.BAL.: The F [R/B, +/-] buttons are used as [R/B] adjustment buttons. PHASE: The F [R/B, +/-] buttons are used as [+/-] adjustment buttons. (Default setting: WHT.BAL.) [SYNC] Synchronization system selection switch. This switch sets the synchronizing system for the camera.
TK-S215_EN.book Page 14 Tuesday, March 28, 2006 9:39 AM Installation and connection Setting the Lens and Switches (TK-C210FW) Set the video setting switches on the camera unit before mounting it. To set the switches, use a fine-tipped screwdriver. About Connection Cables The maximum connection distance varies with the type of cable used. Please refer carefully to the table for each cable during connection. * Be sure to turn off the power of devices before connecting cables.
TK-S215_EN.book Page 15 Tuesday, March 28, 2006 DC 12 V or AC 24 V power supply cable Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the terminal board. To prevent connection errors or a cable disconnection, we recommend the use of lug plates for the connections. The following table shows the connection distances and connection cables provided that 2-conductor VVF cables (vinyl-insulated vinyl sheath cables) are used.
TK-S215_EN.
TK-S215_EN.book Page 17 Tuesday, March 28, 2006 9:39 AM Selecting a mounting method Mounting the Camera Select a method for mounting the camera according to the intended purpose. Getting Started CAUTION: ● When mounting the camera to the ceiling, ensure to wear safety glasses to protect the eye from any falling object. ● Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain regions.
TK-S215_EN.book Page 18 Tuesday, March 28, 2006 9:39 AM Installation and connection (continued) 4. Remove the outer case. Mounting the Camera (continued) Embedding the camera to the ceiling * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. (This method does not require an outer case.) ALoosen the camera fastening screw with a screwdriver BTo remove, turn the camera unit in the anticlockwise direction 5.
TK-S215_EN.book Page 19 Tuesday, March 28, 2006 9:39 AM 䡵 Connecting 䡵 Mounting 1. Attach the fall prevention wire to the 1. Align j with the shooting direction when 2. 3. 4. 5. 6. 7. camera, followed by attaching it to the ceiling slab (Fall prevention wire is not included.) Connect the video signal cable. (A pg. 14) Lower the cover and connect the connectors. Upon connecting, cover the connectors using the protection cover. Connect the input power supply cable. (A pg.
TK-S215_EN.book Page 20 Tuesday, March 28, 2006 9:39 AM Installation and connection (continued) 6. Set the switches for video images. Mounting the Camera (continued) (TK-C215V4 A pg. 10) (TK-C215V12 A pg. 12) (TK-C210FW A pg. 14) When mounting the camera directly to the ceiling or on the wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 6. 䡵 Setup 4. A 5. Pan fastening Screw 1. Open a hole in the ceiling.
TK-S215_EN.book Page 21 Tuesday, March 28, 2006 9:39 AM 䡵 Mounting 1. Align the position mark of the fastened Outer case mounting screws Adaptor ring Less than 3mm 1. outer case with that of the camera unit. NOTE: When doing so, be careful not to catch the cables in the outer case. 2. Turn the camera unit in the clockwise F UP RON T Fall prevention wire (not supplied) Attach from the ceiling slab 2. 3. Be sure to loosen the screw. direction.
TK-S215_EN.book Page 22 Tuesday, March 28, 2006 9:39 AM Installation and connection (continued) Mount by allowing the cable to exit from the side Mounting the Camera (continued) When mounting the camera to the electrical box NOTE: Before mounting the camera to electrical boxes, please consult your nearby JVC authorized dealer for details on the type of electrical box for which mounting is possible.
TK-S215_EN.book Page 23 Tuesday, March 28, 2006 9:39 AM Adjusting Image Adjusting Images Pan : ± 175 ⬚ Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and focus. * The power to the camera body must be ON when adjustments are performed.
TK-S215_EN.book Page 24 Tuesday, March 28, 2006 9:39 AM Adjusting Image (continued) Adjusting Images (continued) 䡵 TK-C215V4 L Adjusting the field angle/focus/ brightness IRIS LEVEL H Iris Level Adjustment Focus Adjust Button FOCUS ADJUST (Not available on TK-C210FW) Zoom ring W Upon determining the imaging direction, adjust the field angle, focus and iris level accordingly. The method of adjustment varies with the camera in use. TK-C215V4 (A pg. 24) TK-C215V12 (A pg.
● When setting images on TK-C215V12, ensure that the lens is covered using the dome cover. This camera is equipped with a high magnification lens. When adjustment is not performed through the cover, the lens may go out of focus when the cover is attached. ● When adjusting the focus, ensure that the optical axis of the lens and the center of the dome cover are aligned, and that the screen is not distorted. (See illustration below) 1. RESET/[SPOT] R B LL PHASE TELE L H LEVEL [MEMORY] WHT.BAL.
TK-S215_EN.book Page 26 Tuesday, March 28, 2006 9:39 AM Adjusting Image (continued) Adjusting Images (continued) Mounting the Dome Cover After setting is complete, mount the dome cover. RESET/[SPOT] B LL PHASE R L H LEVEL [MEMORY] WHT.BAL. NEAR ALARM POSITION TELE ZOOM/FOCUS FAR WIDE 2 POSITION SELECT 4 1.,5. 1 2 3 4 5 6 7 8 4. 2.,3. IRIS Registering alarm position For registering the angle of view during monitoring when there is an alarm input. 1.
TK-S215_EN.book Page 27 Tuesday, March 28, 2006 9:39 AM 1. Remove the dome cover. White-spot correction As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera power supply and wait for at least 30 minutes. (Not available on TK-C210FW) 2. Cover the lens surface using a black sheet of paper, etc. so that light does not enter the lens. 3.
TK-S215_EN.book Page 28 Tuesday, March 28, 2006 9:39 AM Others Specifications 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on PAL standard Scanning frequencies U type : 15.734 kHz (Horizontal), 59.94 Hz (Vertical) E type : 15.
TK-S215_EN.book Page 29 Tuesday, March 28, 2006 9:39 AM 䡵 General Power supply : AC 24 V H 50 Hz/60 Hz DC 12 V d Power consumption TK-C210FW: E type : 220 mA TK-C215V4: U type : 4.2 W E type : 340 mA TK-C215V12: U type : 6.6 W E type : 550 mA Ambient temperature : -10 f to 50 f (14 g to 122 g) (Operation) : 0 f to 40 f (32 g to 104 g) (Recommended) Mass TK-C210FW : Approx. 450 g TK-C215V4 : Approx. 470 g TK-C215V12 : Approx. 530 g Accessories U type: Instructions ........................................
TK-S215_EN.book Page 30 Tuesday, March 28, 2006 9:39 AM Others (continued) 䡵 External Dimensions [Unit: mm (inches)] When embedded 46 (1-13/16) 44 (1-3/4) 20 (13/16) φ (7 22 /8) 4.5 (3/16) 6CDNG JQNG - (3 55 ) SR -1/8 (2 9 φ8 ) 1/2 φ116 (4-9/16) 83.5 (3-5/16) 4-φ4.
TK-S215_EN.
TK-S215_EN.