DVD / HDD & Mini DV Video Recorder Instructions

Masterpage:Right+
EN 73
Filename [DVM70S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 73Friday, 6 May 2005 12:06
The VCR Plus+ programming system assigns a VCR Plus+ guide
channel to the TV channels and the cable channels. These guide
channel numbers are also called the VCR Plus+ channel codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates correctly, it is
necessary to set the “VCR Plus+ Guide Channel” for each station.
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit or cable box. Check
your TV listing, or contact your cable supplier for details.
● Many TV stations can be viewed on cable. Check your TV listing,
or contact your cable supplier for details.
Guide Channel Number Set
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press DE to select AINITIAL SET UPB, then press G.
4 Press DE to select ATUNER
SETB, then press G.
5 Press FGD E to select AGUIDE
CH SETB, then press ENTER.
6 Press FG to select AGUIDE CH
SETB, then press ENTER.
7 Press FG to select the Guide
Channel number for the desired
station as shown in the TV
listings. Then press ENTER.
● If you receive your channels
with a cable box and if you have
properly set your Controller,
ACABLE CHB appears in place of ADVD CHB.
8 Press FG to select ADVD CHB, then press ENTER. Press FG
to select the number of the unit’s channel position on which the
Guide Channel Number’s broadcast is received by the unit or
the DBS receiver. Then press ENTER.
● Repeat steps 6 – 8 as necessary.
9 Press SET UP to complete the setting.
Changing VCR Plus+ Setting
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
FGDE
ENTER
SET UP
CABLE/DBS
DVDTV
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
13
12
11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
AUTO CH SET
MANUAL CH SET
HDD/DVD/DV SET
FUNCTION SET UP
INITIAL SET UP
TUNER SET CLOCK SET
GUIDE CH SET
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT WITH @
13
12
11
--
1
ENTER
SELECT
SET UP
EXIT
RETURN
GUIDE CH
CABLE CH
INITIAL SET UP > GUIDE CH SET
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT WITH @
DVM70S_00.book Page 73 Friday, May 6, 2005 12:06 PM