User manual

70
Applications
Unit Setting 1 (continued)
Main Menu List (continued)
Item Preset Values Description
Reference
Page
C Error Report Enables you to select how you want to be notified when an error is
detected in the system.
^
Dialog ● Select check box
Do not select
check box
Select [Dialog] to display a warning dialog on the screen. A Page 156
Mail ● Select check box
Do not select
check box
Select [Mail] to receive an e-mail notification on any abnormality at
the preset e-mail address.
Memo :
● For details on errors, refer to the actions to take when the
[WARNING] indicator lights up. ( A Page 156)
^
D Record Control ^
ON at startup ● Select check box
Do not select
check box
Select this check box to turn on the recording control mode when
the system starts up.
E Mail Server ^ Enables you to configure the necessary information on the mail
server to be used if you have selected
A Mail B in the [Error Report]
item
C .
^
SMTP Server Setting for the outgoing mail server.
Port Number ● 25
User ID
^
Password ^
POP Server Setting for the incoming mail server.
Port Number ● 110
User ID
^
Password ^
SMTP
Authentication
● NONE
Authentication
POP before SMTP
Enables you to select the method of user authentication when
sending out a mail. For queries on the settings, consult your system
administrator.
Send Test Mail Click to send out a test mail to the address specified in the [Mail
Send List] item
I .
F Emergency Record A Page 52
Time of Record NONE
30seconds
● 60seconds
5minutes
10minutes
20minutes
Continue
Select the duration of emergency recording, which starts recording
of all channels when a signal is input to the [EMERGENCY]
terminal on the rear panel.
Select
A Continue B to continue recording until it is stopped manually
on the front panel.