Audio/Video Control Receiver Instructions

Page 33
English
6. Press Control
%%
%%
% /
until “–DELAY +” appears on the display.
7. Press Control
@@
@@
@ /
##
##
# to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1 Select this when the distance from you to your rear speakers is greater than that
to the front speakers.
DELAY 2 Select this when the distance from you to your rear speakers is almost equal to
that to the front speakers.
DELAY 3 Select this when the distance from you to your rear speakers is a little less than
that to the front speakers.
DELAY 4 Select this when the distance from you to your rear speakers is much less than
that to the front speakers.
Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.
8. Press Control
%%
%%
% /
until “TEST” appears on the display, then press Control
@@
@@
@ /
##
##
# to start
checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following
order:
Notes:
No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center
mode.
9. If necessary, adjust the speaker output level as follows:
To adjust the rear speaker output level, press Control % / until “– REAR +” appears on the
display, then press Control @ / #.
To adjust the center speaker output level, press Control % / until “–CENTER+” appears on the
display, then press Control @ / #.
Notes:
You cannot adjust the left and right rear speaker output level separately.
You cannot adjust the rear speaker output level when you have selected “3CHLOGIC.”
You cannot adjust the center speaker output level when you select “PHANTOM” or “OFF” for the
center mode.
DELAY 1
DELAY 2
DELAY 4
DELAY 3
Left front speaker
Center speaker
Rear speakers
Right front speaker
Front panel
Front panel
Front panel
RX-730RBK(EF)0054-001A.En.29-36 97.7.25, 6:37 PM33