Audio/Video Control Receiver Instructions

Page 22

English

Assigning Names to Preset Stations

You can assign a name of up to five characters to each preset station (from preset channel number 1 to 20).

When a preset station is tuned in, its assigned name will appear on the display.

On the front panel only:

1. Tune in a preset station (preset channel number 1 to 20).

See page 21 for details.

2. Press MEMORY (next to the TUNER button).

The preset channel number starts flashing.

Note:

If you press Control

ﬁ

while the preset channel

number is flashing, you can change the preset channel

number.

3. Press Control

# (or

@) until the first character

position starts flashing.

4. Press Control

% /

ﬁﬁ

ﬁ to select a character.

You can use characters listed below.

5. When a character you want appears, press

Control

# (or

@).

The next (or previous) character position starts

flashing.

6. Repeat steps 4 and 5 to enter up to five characters.

7. Press MEMORY (next to the TUNER button) again while the last selected character is flashing,

after you have assigned a name.

To erase the input characters

Insert blanks using the same procedure described above.

MEMORYTUNER