Compact Component System Instructions Manual

ManualsBrandsJVC ManualsStereo SystemNX-D7

9 10 13 14

11 12 15 16

GVT0276-002A EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up; 7th

GVT0276-002A EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up ; 7th

GVT0276-002A EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up; 7th

Basic OperationsConnections

Specifications

Amplifier section—NX-D7/NX-D5/NX-D3/NX-DC3

Output Power:

NX-D7:

MAIN SPEAKERS 230 W (115 W + 115 W) at 3 Ω

(10% THD)

SUBWOOFERS 230 W (115 W + 115 W) at 3 Ω

(10% THD)

NX-D5:

MAIN SPEAKERS 230 W (115 W + 115 W) at 3 Ω

(10% THD)

SUBWOOFER 115 W at 3 Ω (10% THD)

NX-D3/NX-DC3: 230 W (115 W + 115 W) at 3 Ω

(10% THD)

Audio Input: AUDIO IN: Stereo mini (

3.5 mm)

500 mV/47 kΩ (at “AUDIO LVL3”)

250 mV/47 kΩ (at “AUDIO LVL2”)

125 mV/47 kΩ (at “AUDIO LVL1”)

Digital Input/Output:

OPTICAL DIGITAL OUTPUT (output only):

–21 dBm to –15 dBm (660 nm ±30 nm)

NX-D7:

Bluetooth ADPT

USB1:VIDEO/AUDIO PLAY (input only)

USB2:AUDIO REC/PLAY (input and output)

HDMI MONITOR OUT (output only)

NX-D5:

USB: REC/PLAY (input and output)

HDMI MONITOR OUT (output only)

NX-D3/NX-DC3:

USB: REC/PLAY (input and output)

VIDEO OUT:

Color system: NTSC/PAL (interlaced/progressive)

VIDEO (Composite): 1 V(p-p)/75 Ω

COMPONENT: (Y) 1 V(p-p)/75 Ω

B/PR) 0.7 V(p-p)/75 Ω

HDMI MONITOR OUT (NX-D7/NX-D5):

480p/576p/720p/1080i/1080p

Speaker impedance: 3 Ω – 16 Ω

Tuner section

FM tuning range: 87.50 MHz – 108.00 MHz

AM tuning range: 531 kHz – 1 710 kHz (at 9 kHz)

530 kHz – 1 710 kHz (at 10 kHz)

Disc player section

Region codes: Middle East: 2 / South East Asia: 3 / Central

and South America, Australia: 4

Dynamic range: 80 dB

Horizontal resolution: 500 lines

Wow and flutter: Immeasurable

USB section

Recording format: MP3/WMA format

USB specification: Compatible with USB 2.0 Full Speed

Compatible device: Mass storage class

Compatible system: FAT16, FAT32

Bus power supply: DC 5 V 500 mA

Bluetooth section (NX-D7)

Version: Bluetooth ver. 2.0 + EDR Class 1/Class 2

Compatible Bluetooth profile: A2DP, AVRCP

Communication format: 2.4 GHz FHSS

HDMI section (NX-D7/NX-D5)

Output power: DC 5 V 55 mA

Cassette deck section (NX-DC3)

Frequency response: Normal (Type 1): 50 Hz – 14 000 Hz

Wow and flutter: 0.15% (WRMS)

General

Power requirements:

AC 110 – 127/220 – 240 V , 50/60 Hz

For Australia: AC 240 V , 50 Hz

Power consumption:

NX-D7: 130 W (at operation)/21 W (at standby) /

1 W or less (at ECO mode)

NX-D5: 85 W (at operation)/16 W (at standby) /

1 W or less (at ECO mode)

NX-D3/NX-DC3: 65 W (at operation)/14 W (at

standby) / 1 W or less (at ECO mode)

Dimensions (approx.):

195 mm × 333 mm × 313 mm

(W × H × D)

Mass (approx.):

NX-D7/NX-D5: 3.5 kg

NX-D3: 3.4 kg

NX-DC3: 3.7 kg

Main Speaker—SP-NXD7F/SP-NXD3

Type: :3-way 3-speaker Bass Reflex Type

(Magnetically-Shielded Type)

Speaker units

Tweeter :2.0 cm cone x 1

Mid Range :5.0 cm cone x 1

Woofer :16.0 cm cone x 1

Impedance: :3 Ω

Power handling capacity :115 W

Frequency range :40 Hz – 20 000 Hz

Sound pressure level: :84 dB/W•m

Dimensions (W × H × D) :205 mm × 409.5 mm × 290.5 mm

Mass :3.6 kg each

Subwoofer—SP-NXD7W

Type :1-Way Bass Reflex Type

(Magnetically-Shielded Type)

Speaker units :16.0 cm cone x 1

Impedance :3 Ω

Power handling capacity :115 W

Frequency range :40 Hz – 5 000 Hz

Sound pressure level :83 dB/W•m

Dimensions (W × H × D) :205 mm × 409.5 mm × 290.5 mm

Mass :3.5 kg

Design and specifications are subject to change without

notice.

Preparations

Preparing the remote control

Insert the batteries into the remote control by matching the

polarity (+ and –) correctly.

If the range or effectiveness of the remote control decreases,

replace both batteries.

Caution:

Be careful your children do not put the batteries into their

mouths.

About HDMI CEC

CEC is device controlling signals optionally employed for

the HDMI standard. When devices equipped with CEC are

connected, each device can control the others. This System

is compatible with some basic functions of HDMI CEC.

For example, when you start playback on the System, the

connected TV compatible with HDMI CEC automatically

turns on.

• This function is available only when the source is set to

“DVD/CD” or “USB1.”

• You can select or deactivate the usage for the HDMI CEC

functions using “CEC” on Setup Menu (refer to “Setup

Menu” in “Operating Guide”).

ON 1

To use the HDMI CEC functions normally.

ON 2

Select this if you do not want to have the

System automatically turned on/off by

turning on/off the TV or other external

HDMI CEC compatible devices. All other

available HDMI CEC functions operate the

same as when “ON 1” is selected.

OFF

To deactivate the HDMI CEC functions.

• For details about the CEC function, refer to the operation

manuals of the connected CEC devices.

• The CEC function may not work depending on the

settings or status of the System or the connected CEC

devices.

Using the number buttons and cursor buttons on the

remote control

To change the color system and scanning mode

You can select the video output to match it to the color

system of your TV (NTSC or PAL).

• If you connect a progressive TV through the component

video cords or the HDMI cable, you can enjoy a high

quality picture by selecting progressive scanning mode.

• You can change the setting only while playback is stopped.

While “DVD/CD” is selected as the source and playback is

stopped...

For NX-D7/NX-D5

When an HDMI cable is connected

AUTO

The System automatically emits the

video signal to get the best picture

quality on your TV.

PAL 576P /

PAL 720P /

PAL 1080I /

PAL 1080P

For a PAL TV.

P: Progressive

I: Interlaced

NTSC 480P /

NTSC 720P /

NTSC 1080I /

NTSC 1080P

For a NTSC TV.

P: Progressive

I: Interlaced

When an HDMI cable is not connected

PAL 576I /

PAL 576P

For a PAL TV.

Select “PAL 576P” if you connect

a progressive TV through the

COMPONENT jacks.

NTSC 480I /

NTSC 480P

For an NTSC TV.

Select “NTSC 480P” if you connect

a progressive TV through the

COMPONENT jacks.

For NX-D3/NX-DC3

PAL/NTSC

For a conventional PAL or NTSC TV.

PAL PRGR /

NTSC PRGR

For a progressive PAL or NTSC TV.

How to cancel the demonstration

Press and hold DEMO button on the main unit (until

“DEMO CLEAR” appears on the display) while on standby.

• When the ECO Mode is activated, the demonstration

does not work.

• Refer to the attached sheet “Information about the

demonstration function.”

• In this manual, operations using the remote control

are mainly explained; however, you can use the buttons

and controls on the main unit if they have the same (or

similar) name and marks.

• Illustrations used in this manual is mainly of NX-D7.

They may look different from the model you have.

• “USB 1” (for NX-D7) mentioned in this manual can be

understood as “USB” (for NX-D5/NX-D3/NX-DC3).

• Button and control operations are explained in the table

below.

Indicates that you press the button.

2 sec.

Indicates that you press and hold the

button for a specified period.

Indicates that you slide your finger

on the volume jog in the specified

direction(s).

For private listening

Connect a pair of headphones to the PHONES jack on

the main unit. The sound will no longer come out of the

speakers. “HPHONE IN” appears on the display for a while.

Be sure to turn down the volume before connecting or

putting on the headphones.

• Disconnecting the headphones will activate the speakers

again.

• When using the headphones with the L-shaped plug,

connect it with the head of the plug facing the right side

as illustrated below.

DO NOT turn off (standby) the System with the volume

set at an extremely high level; otherwise, the sudden blast

of sound may damage your hearing, speakers and/or

headphones when you turn on the System or start playback.

Changing the Display Brightness

You can dim the display and illumination lamp.

DIMMER 1

Dims the display and the blue illumination

on the main unit.

DIMMER 2

Dims the display more than DIMMER 1

and turns off the blue illumination on the

main unit.

AUTO

DIMMER

Dims the display automatically to the

same level as DIMMER 2 and turns off the

blue illumination while playing moving

pictures or still pictures.

DIMMER OFF

Normal brightness.

Setting the ECO (Ecology) Mode

Setting the ECO Mode allows you to reduce power

consumption by turning the display off while on standby.

While the System is on standby...

On the main unit On the remote

To cancel, repeat the procedure.

Turning Off the Power Automatically

Auto Standby

• This does not function while “FM,” “AM” or “AUDIO IN” is

selected as the source.

To cancel, repeat the procedure.

Sleep Timer

1 Specify the time (in minutes).

2 Wait until the set time disappears.

To check the time remaining until the shut-off time, press

SLEEP (while holding SHIFT) once.

To change the display information

• The information displayed and its order vary among the source.

(NX-D5/NX-D3/NX-DC3)(NX-D7)

AUDIO IN:

Current source information = Remaining time for recording (NX-D7)*

= Clock

TUNER AM or FM:

Frequency = Remaining time for recording (NX-D7)*

= Clock

DVD/CD:

Current source information = Folder name, file name and tag information (for MP3, WMA, WAV) = Title and chapter

number (while playing)*

/Disc or file type (while stopped) = Remaining time for recording (NX-D7)*

= Clock

USB:

Current source information = Folder name, file name and tag information (for MP3, WMA, WAV) = Title and chapter

number (while playing)*

/Disc or file type (while stopped) = Clock

Only while a USB device is connected to the USB2 terminal. When the remaining time exceeds 100 hours, “REM –:––:––”

appears.

Only while playing back the following discs/files:

DVD-VR: Program number/Play List number and chapter number.

MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/DivX files: Group and file numbers.

DVD Video: Title and chapter numbers.

Bluetooth (NX-D7):

Current source information = Connected device name = Clock

Changing the pattern of the level meter

You can select the appearance of the level meter from 5

patterns (“LVL MTR 1” – “LVL MTR 5”).

Turning On/Off the Power

On the main unit On the remote

• Selecting a source (see below) while in standby mode also

turns on the System.

Selecting the Source

On the remote

NX-D7

NX-D5/NX-D3

NX-DC3

On the main unit

(Touch to select)

Adjusting the Volume

On the main unit On the remote

Volume +: Slide your finger

clockwise.

Volume –: Slide your finger

counterclockwise.

To drop the volume in a moment

To restore the volume, press again or adjust the volume

level.

Do not connect the power cord until all other connections have been made.

(while holding)

23 4 5 6 q w e r

;

Supplied Accessories

After unpacking, check to be sure that you have all the

following items.

• FM antenna (×1)

• AM loop antenna (×1)

• Composite video cord (×1)

• Remote control (×1)

• Batteries (×2)

• AC plug adapter (×1) (Not supplied for Australia,

Thailand and the Middle East.)

If any items are missing, consult your dealer immediately.

Speakers

When connecting the speaker cords, match the

polarity.

NX-D7/NX-D5:

Main speakers: Blue to (+) and black to (–)

Subwoofer(s): Red to (+) and black to (–)

NX-D3/NX-DC3:

Red to (+) and black to (–)

TV/monitor

• Connect your TV directly to the System. Connecting the System to a TV via other device, such as a VCR or an HDD/

DVD recorder, may interfere with your viewing. Connecting an integrated TV/VCR system to the System may also

interfere with your viewing.

• After connecting a TV, select the appropriate video signal output according to the color system. See “Preparations.”

• To select progressive scanning mode, use the COMPONENT jacks or HDMI terminal.

• When you use an HDMI cable, make appropriate settings in the Setup Menu (refer to “Setup Menu” in “Operating

Guide”).

AM/FM antenna

To assemble the AM loop antenna

Keep the AM loop antenna cable wrapped around the

AM loop antenna frame, otherwise the effectiveness and

sensitivity of the AM loop antenna may be reduced.

For better FM reception, disconnect the supplied

FM antenna, and connect to an outdoor FM antenna

using a 75 Ω wire with coaxial type connector (IEC or

DIN45325).

Digital audio component

• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly

according to the connected digital audio equipment (refer to “Setup

Menu” in “Operating Guide”).

• Digital signal through the OPTICAL DIGITAL OUTPUT terminal

is transmitted only when “DVD/CD” or “USB1” is selected as the

source.

Voltage selector

To the wall outlet

1 HDMI indicator (for NX-D7/NX-D5)

2 HD indicator (for NX-D7/NX-D5)

3 REC (Recording) indicator

4 PRGR (Progressive) indicator

5 Recording mode indicator (for NX-D7)

6 Bluetooth indicator (for NX-D7)

7 USB 1/2 indicator

8 TAPE indicator (for NX-DC3)

9 Playback mode indicators

• GR indicator

• PRGM indicator

• RND indicator

• Repeat Mode indicators

/ /

p FM reception indicators

q Level meter

w Sound Mode indicators

• S.MODE (Sound Mode) indicator

• (Surround) indicator

e HP S (Headphone Surround) indicator

r V. BASS (Vario Bass) indicator

t 3D P (3D Phonic) indicator

y C. VOICE (Clear Voice) indicator

u Karaoke operation indicators

• K.SCORING (Karaoke Scoring) indicator

• (Mic Mixing) indicator

• (Echo) indicator

• V.MASK (Vocal Masking) indicator

i Timer indicators (REC: for NX-D7)

o A.STBY (Auto Standby) indicator

; SLEEP indicator

a My Sound indicator

s Main display

2 sec.

(canceled)

Remote sensor

STANDBY lamp

Turns off: The System is turned on.

Lights in red: The System is on standby.

Headphones

PHONES jack

When using the remote control

Point the top of the remote control towards the remote

sensor as directly as possible. If you operate it from a

diagonal position, the operating range (about 5 m) may be

shorter.

(NX-D7)

(NX-DC3)

Motion Sensor

When you move your hand close to the remote sensor in the

following cases, the illumination on the front panel turns on.

• While the System is on standby.

• When “DIMMER 1” or “DIMMER 2” is selected.

• When “AUTO DIMMER” is selected and playing moving

and still pictures.

To activate or deactivate the motion sensor, press

MOTION SENSOR.

• When the motion sensor is activated, “SELECT SOURCE”

appears on the display while on standby.

• When the motion sensor is deactivated, the clock is shown

on the display while on standby.

• When the ECO Mode is activated, the motion sensor does

not work.

The number buttons

Press to enter numbers.

Example:

• To select number 5, press 5.

• To select number 10,

press 10.

• To select number 15,

press 10, 1, then 5.

• To select number 30,

press

10, 3, then 0.

• To select number 125,

press 10, 10, 1, 2, then 5.

The cursor buttons

Press to select an item, adjust

a parameter, or move the

character entry position.

(NX-D7)

Touch panel

The illustration above is for NX-D7.

• When you start playback on the main unit,

the input of the connected TV compatible

with HDMI CEC automatically changes to

the HDMI.

• When the HDMI cable and the component

video cord or the composite video cord are

connected at the same time, the output of the

VIDEO OUT will not perform properly.

The illustration above is for NX-D7.

FM antenna (supplied)

Extend it so that you can obtain the

best reception.

(NX-D5)

AM loop antenna

(supplied)

Turn it until the best

reception is obtained.

VIDEO OUT jacks MONITOR OUT terminal (only for NX-D7/NX-D5)

(NX-D7) (NX-D3/NX-DC3)

From right

speaker

From left

speaker

From right speaker

From left speaker

From subwoofer

From right speaker

From left speaker

From left subwoofer

From right subwoofer

Protective cap

Blue

Green

Red

Component video cord (not

supplied)

Composite video cord (supplied)

Yellow

HDMI cable (not supplied)

Use an HDMI cable of less than 2 m.

Black

Blue

Red

Blue

Red

Black

Blue

Black

Red

Black

Blue

Black

Red

Optical digital cord

(not supplied)