Compact Component System Instructions Manual

– 14 –
English
To stop playing for a moment
Press DISC 3¥8.
While pausing, the elapsed playing time flashes
on the display.
To resume playing, press DISC 3¥8.
To go to another track
Press 4 or ¢ before or during
playback (or press ¢ (NEXT ¡) /
4 (PREV. 1) on the remote
control).
• 4: Goes back to the beginning of the current or previous
tracks.
• ¢: Skips to the beginning of the next or succeeding tracks.
If you press and hold (on the unit only) 4 or ¢ before
playing
You can change the tracks continuously.
To locate a particular point in a track
On the remote control:
During play, press and hold ¢
(NEXT ¡) or 4 (PREV. 1).
On the unit:
Press TUNING +/¡ or 1/–.
• TUNING1 /– (or 4 (PREV. 1)): Fast reverses the disc.
• TUNING+/ ¡ (or ¢ (NEXT ¡)): Fast forwards the disc.
• There are 4 searching speed:
• X1 – 2 seconds search
• X2 – 5 seconds search
• X3 – 10 seconds search
• X4 – 20 seconds search
To go to another track directly using the number buttons
Pressing the number button(s) on the remote control before or
during play allows you to start playing the track number you
want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
Total time and total number of tracks will only appear on the display
at the following condition:
(1) Power ON in CD mode using standby button.
(2) New CD inserted into the current tray and the tray closed using
the eject button.
* The above only apply for audio CD and VCD.
(3) Search speed might be different for different type of discs.
Continued
Playing Back the Entire Discs
— Continuous Play
1 Load CDs.
2 Press one of the disc number
buttons (DISC 1, DISC 2 and
DISC 3) for the disc you want to
play.
CD starts playing from the first track of the selected disc.
• Pressing DISC 3/8 instead of the disc number buttons
starts playing back if a CD is on the tray.
• Playing back the CD using the DISC SKIP button.
You can also play the CDs using the DISC SKIP button.
During playback, each time you press the button, the next
CD is automatically played back.
To stop playing, press 7.
To remove the disc, press 0. (If the CD is playing, stop the
CD before 0 is pressed.)
CD playback sequence
When 3 CDs* are loaded on the disc tray, they are played in one of
the following sequences.
•
When DISC 1 is pressed: DISC 1 ] DISC 2 ] DISC 3 (then stops)
• When DISC 2 is pressed: DISC 2 ] DISC 3 ] DISC 1 (then stops)
• When DISC 3 is pressed: DISC 3 ] DISC 1 ] DISC 2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Total Number of Contents (TOC) reading
STOP button does not function during CD changing time and TOC
reading (about 10-20 seconds). You can press STOP button only
after playing time start counting on the display.
If no CD is placed on the disc tray, “NO DISC” appears on
the display.
SELECT
Track number
Elapsed playing time
Selected disc indicator
1 2 3
Basic CD Operations
While playing a CD, you can do the following operations.
To remove/change the CDs during playback
While playing back a CD (e.g. DISC 1), you can remove or
change the other CDs (e.g. DISC 2 and DISC 3) by pressing
0 . After removing or changing, press the same button to
close the tray.