Micro Component System Instruction Manual

Introduction

This product is compatible with PAL and NTSC

color systems.

In standby mode, select PAL or NTSC to match

your TV.

If the VIDEO OUT SELECT switch is switched

over when the power is on, turn off the power, and

then turn it on again.

• Before playing back a disc, it is also required to

select the correct MONITOR TYPE in the

PICTURE menu according to the aspect ratio of

your TV ( page 38).

NOTE

• If you play back an NTSC disc with this setting set

to "PAL", you can watch the playback pictures (the

disc will be reproduced using "PAL 60" format), but

the TV screen may rolls over upward and down-

ward rapidly.

NOTE

• If you play back a PAL disc with this setting set to

"NTSC", you can watch the playback pictures, but

the following symptoms may occur:

• The items on the disc menu will be blurred, and

be shown slightly shifted when highlighted.

• The aspect ratio of the picture may differ from

the original aspect ratio.

• The picture movement is not smooth.

Selecting the Color System

UX-QD9[A]-03.fm 6 ページ２００４年９月７日　火曜日　午前１１時１９分