ENGLISH WIDE LCD PANEL TV INSTRUCTIONS Contents PREPARATION Safety precautions ............................... 2 Remote control buttons and functions ... 3 Set up and connections ....................... 4 Initial settings ....................................... 6 Registering / Editing channels ............. 6 FUNCTIONS Picture setting ...................................... 7 Sound setting ...................................... 9 Useful functions ................................. 10 Viewing Teletext ......
Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual regarding setup! - Connect only to a 110-240 V, 50/60Hz AC outlet. • Make enough room for inserting and removing the power plug! • Place the TV as close to the outlet as possible! - The main power supply for this TV is controlled by inserting or removing the power plug.
Remote control buttons and functions “AAA/R03” Batteries • Insert the batteries Use two “AAA/R03” dry cell batteries. Insert the batteries from the · end, making sure the · and ª polarities are correct. WARNING: Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. If this symbol is shown, it is only valid in the European Union. Switch between “TV, STB, BD/DVD, AUDIO” Select TV or Video input Channel information, Turn the on-screen guide off / on.
Set up and connections TV/VIDEO MENU/OK CHANNEL Power lamp ON : Lit (Blue) OFF : Unlit Power lamp lights while the TV is on. • “Power Lamp” (P. 11) Remote control sensor / Eco Sensor VOLUME Connect an aerial and VCR / DVD Player Switch between TV / VIDEO devices Display on-screen menu / set AERIAL 2 Change channel / Page / Hyper Scan Function (P. 3) , 6 6)$%/ Volume / Adjust Power On / Off To Headphone (P.
Set up and connections (continued) VIDEO-1 Watching videos You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.) Output Headphones HDMI-1 HDMI-2 HDMI-3 DIGITAL VIDEO/AUDIO To “HDMI-1” Input • Composite signal / Component signal (P. 16) • Sound L / R • Use Component signal “Video - 1 Setting” (P. 12) HDMITM Connector.
Initial Settings Registering / Editing channels You can edit the channel list or register new channel manually. 1 Turn on the TV • Show only when powering on for the first time. • The power on the unit can also be used. JVC logo appears 2 ไทย 3 ID Select the Teletext language group 'ROUP 'ROUP 'ROUP 'ROUP 'ROUP 'ROUP )$ #( ## #( #( #( #( #( #( #( #( #( #( (Red) • See “Language group for Teletext” (P.
Picture setting 2. Select item or setting 1. Select 0ICTURE 2. Enter • To enter an items menu 0ICTURE 0ICTURE -ODE "ACKLIGHT #ONTRAST "RIGHTNESS 3HARPNESS #OLOUR 4INT 7HITE "ALANCE &EATURES 1. Display “Picture” menu "RIGHT 1. Select 1. Select 2. Adjust 3. Finish 2. Enter #OOL You can select a preset picture setting according to your favour. Bright : Hightens contrast and sharpness. Picture Mode Game Mode : Adjusts picture setting when play the game.
Picture setting (continued) Finer picture adjustment &EATURES #LEAR 3$ $IGITAL 6.2 $IGI0URE 0ULL $OWN #OLOUR -ANAGEMENT 0ICTURE -ANAGEMENT 3MART 0ICTURE $YNAMIC "ACKLIGHT -0%' .OISE 2EDUCTION #OLOUR 3YSTEM :OOM /FF /FF /FF /FF /FF /FF /FF /FF /FF : For clearly picture (Off / Mode-1 / Mode-2) When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot be operated. Clear SD : Reduces the amount of noise in original picture.
Sound setting 1. Display “Sound” menu. 2. Select item or setting 1. Select Sound Stereo/I■II Sound Meister Treble Bass Surround Balance Voice Enhancer Al Volume 3OUND 2. Enter Stereo/I II ■ Sound Meister 1. Select D < I II Mono Off 3.
Useful functions 1. Display “Features” menu. &EATURES 1. Select /N 4IMER 3LEEP 4IMER #HANNEL 'UARD "LUE "ACK #HILD ,OCK !UTO 3HUTOFF &AVOURITE 3ETTING 0OWER ,AMP %CO 3ENSOR &EATURES 2. Enter 1. Select PR channel that you want to watch. Sleep Timer TV to turn off automatically to standby mode after a set time. Channel Guard /FF 3. Finish 2. Enter /FF /FF 3. Set 1. Select “On Timer” 2. Set time, maximum 12 hours (12:00) to reset the time.
Useful functions (continued) Blue Back Displays a blue screen and mute the sound when the signal is weak or absent. (On / Off) Child Lock Disables the side control buttons of the TV. (On / Off) Auto Shutoff Sets the power to turn off if no TV signal (RF) is received and no operation is performed for about 15 minutes. (On / Off) Deletes the favourite channel that you registered. Favourite Setting &AVOURITE 3ETTING (Blue) 1.
Viewing Teletext Watching Video or DVDs This TV can display TV broadcasts and Teletext on the same channel in two windows. Select the input Source. 1. When watching TV TV TEXT 4%84 4%84 TEXT 4%84 4%84 1. Select !6 3ELECT 6IDEO 6IDEO ($-) ($-) ($-) 0# 2. Set • Operate the connected device and play video. 1. Select “Set Up” 1. Select 3ET 5P 2. Enter 2. Select item 2.
Configuring your remote control You can configure your TV’s remote control to operate your other devices. Note Configure your remote control. 1. Turn on the device manually. • If your device does not respond, try all the available codes for the device’s brand. 2. Switch the remote control mode that matches • If none of the code works, or the brand is not listed, refer to “Using the search code function” (P. 14). your device. Refer to the table on the right to select an appropriate mode.
Using the search code function This function searches through the codes one by one, beginning from the first code in the list. Button functions ■ Change the remote control mode 1. Turn on the device manually. 2. Switch the remote control mode that matches your device. Press to select the mode. 3. Activate the search code function. and Hold down until the mode indicator blinks. 4. Point the remote control at your device and press .
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Page Check the aerial cable and TV connections . P. 4 Check the direction of the aerial. P. 4 Check the aerial or its cable damaged or not. -- Patterns, stripes or noise Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.
Technical information Language group for Teletext Group PC Signals that can be displayed • Languages If the signal doesn’t appear, check that the vertical frequency on the PC is set to “60Hz”.
Technical information (continued) What is “Full Native”? • With the full HD LCD display and “Full Native”, you can enjoy full native HD resolution of 1920 x 1080. It exposes flaws in the video that were hidden when viewing on “Full”. Full Full Native * The illustrations are emphasised to make clear differences between “Full” and “Full Native”. • Dark bar or noise may appear at the edges of the screen when viewing in “Full native” for some videos.
CH / CC List To use the Insert function (P. 6), find the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
Specification Main unit Model Broadcasting systems Terminals / Connectors LT-42Z49 LT-32Z49 Colour systems PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz Channels and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VL) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41).
© 2009 Victor Company of Japan, Limited GGT0312-002A-H-EN.
