Color Video Camera Instruction
5
2. CONTROLS, INDICATIONS AND CONNECTORS
Camera Control [Panel side]
1
[POWER] power switch and its LED
This is the ON/OFF power switch. When power is supplied
the LED light.
2
[FREEZE] freeze button and its LED
The video signal can be frozens by this button.
When the freeze button is pressed, the LED light. When the
freeze is released, the LED turns off.
Refer to the “MANUAL OPERATION” on page 17.
3
[MEMORY] memory button
Select one of the FILES LEDs, No. 1 to 4
4
with the SE-
LECT button
5
. Then press and hold MEMORY button for
more than 2 seconds to register the value set at the MENU
screen to be the selected file.
Refer to the “FILE SETTING” on page 15.
4
[FILES] file selected LEDs
When the [SELECT] button
5
is pressed, the LED for the
selected file lights. Each time the SELECT button is pressed,
the file LED changes
1 2 3 4
in turn.
For the
5
to
10
, refer to the “6. SETTING ON THE MENU
SCREEN” on the page 18.
5
[SELECT] select button
Each time this button is pressed, the file changes.
6
[MENU] menu button
When this button is pressed, “on screen” signals are output
from connectors
20
,
21
and
22
to display the MENU screen.
When again pressing this button, the normal screen is re-
sumed.
ON
OFF
CAMERA CONTROL UNIT KY-F58
FREEZEFILES
WHITE PAINT
POWER
VIDEO LEVELTO CAMERA
4321
MEMORYSELECT
MENU
FULL AUTO
RB
LEVEL
PAINT
SET
PULL OPEN
1
13
14
15
34
16 1917 18
5 2
LOCK
SET ITEM-
ITEM+ DATA+
DATA-
RESET
ON
4321
ON
OFF
7
101112
6 8 9
BARS
MENU
7
[SET] set button.
To choose the item on the MENU screen, press this button
to display the sub-menu screen.
8
[ITEM+ (BARS), ITEM–] item buttons
• When ITEM+ button is pressed on the normal screen, the
color bar signal is output from output connectors
20
,
21
and
22
. When pressing this again, it returns to the normal
screen.
• When the menu screen is displayed ,the required item can
be selected.
9
[DATA+, DATA–] data buttons
When the menu screen is displayed, data of each item can
be changed.
For the step
5
to
9
, refer to “6. SETTING ON THE MENU
SCREEN” on the page 18.
10
[LOCK] lock switch
When the lock switch is “ON”, all functions except the Power
switch
1
, the Freeze button
2
, and the select button
5
cannot be operated.
11
[RESET] reset button
When this button is pressed, the set values for each FILE
are reset to the initial values set at factory.
Refer to “RESET” on the page 16.
see subsection 1.6.2 of this service maual