CD Receiver Instructions

23
ENGLISH
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “SCM LINK” with ¢
or 4 .
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
Selecting the level display
You can select the level display according to your preference. When shipped from the factory,
“AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator
• AUDIO 2: Alternates “AUDIO 1” setting and illumination display
• OFF: Erases the audio level indicator and the equalization pattern indicator
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “LEVEL” with
¢ or 4 .
3. Select the desired mode with the control dial.
The level display setting changes as follows:
LINK ON LINK OFF
AUDIO 1
OFF
AUDIO 2
EN20-25KD-SX975/SX875[U]f 18/1/01, 09:1423